Skip to main content
Home » Jeep Engine & Fuel System » Air Intakes » Performance Air Intakes » K&N Blackhawk Cold Air Intake System

K&N 71-1576 Blackhawk Cold Air Intake System for 18-25 Jeep Wrangler JL & Gladiator JT with 3.6L Engine

Quadratec Part #: 17147-0010
K&N Part #: 71-1576
Description
The K&N Blackhawk Cold Air Intake System is a perfect aftermarket upgrade for your 2018-2020 3.6L Jeep JL Wrangler. Increase your air flow by adding this cold air intake system which features a free-flowing, mandrel-bent aluminum tube to achieve the improved air flow you’re going for. The Black color scheme on all components included in this Kit, gives your Jeep that stealth look under your hood. This Blackhawk Intake is designed to improve throttle response and engine sound. The intake tube accommodates the factory inlet air temperature sensor and crank case vent hose while the oversized cone shaped air filter is made from an oil-free synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (driving conditions dependent). This Cold Air Intake is American made and will yield the power and acceleration improvements you’re looking for.

CARB Notice

  • 50 State Legal - CARB E.O. Number D-269-84
Details

Power Increase: The Blackhawk Cold Air Intake is Guaranteed to boost horsepower (9 HP), torque and acceleration. This Intake is engineered to be powerful and sound like it. If you want to add horsepower and produce an impressive engine sound, K&N's Blackhawk Cold Air Intake system will get you where you want to be.

Black powder-coat finish: The Black color scheme on all components included in this Kit, gives your Jeep that stealth look under your hood.

Aluminum Tube: The attractive textured black powder-coated tube features a welded, engraved K&N plate giving you a clean, high-performance look.

Synthetic Filter: The oversized cone shaped air filter is made from an oil-free synthetic filter media that can be used for up to 100,000 miles before cleaning is needed depending on driving conditions. A Black heat shield protects the filter from engine heat and outside elements.

Easy to Install: This Air Intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points and commonly available tools.

Installation Notes
Installation Difficulty:
Skill Level 2 IconLevel 2Intermediate
Installation Time: 1-2 hours
Parts Included
  • Synthetic Air Filter
  • Aluminum Tube
  • Heat Shield
  • All Hardware and Clamps
Warranty
Million Mile Limited Warranty
  • Engine Size: 3.6L Pentastar V-6
  • Shipping Weight: 12lb
  • Shipping Dimensions: 24in x 15in x 14in (L x W x H)
  • Jeep Gladiator (JT)

  • 2020 Jeep Gladiator (JT)
  • Jeep Wrangler 2-Door (JL)

  • 2020 Jeep Wrangler 2-Door (JL)
  • 2019 Jeep Wrangler 2-Door (JL)
  • 2018 Jeep Wrangler 2-Door (JL)
  • Jeep Wrangler Unlimited 4-Door (JL)

  • 2025 Jeep Wrangler Unlimited 4-Door (JL)
  • 2024 Jeep Wrangler Unlimited 4-Door (JL)
  • 2023 Jeep Wrangler Unlimited 4-Door (JL)
  • 2022 Jeep Wrangler Unlimited 4-Door (JL)
  • 2021 Jeep Wrangler Unlimited 4-Door (JL)
  • 2020 Jeep Wrangler Unlimited 4-Door (JL)
  • 2019 Jeep Wrangler Unlimited 4-Door (JL)
  • 2018 Jeep Wrangler Unlimited 4-Door (JL)
Not yet Carb Approved for 21-22 JL and JT model years.
Share Your Thoughts
Review Summary
4.916665
Based on 12 reviews
Shared Media
Questions

Customer Submitted Photos

Share Another Photo

K&N Blackhawk Cold Air Intake System Reviews

Questions