Skip to main content
Home » Jeep Engine & Fuel System » Air Intakes » Performance Air Intakes » K&N 77 Series High-Flow Performance Air Intake

K&N 77-1576KP 77 Series High-Flow Performance Air Intake for 18-24 Jeep Wrangler JL & Gladiator JT with 3.6L Engine

Quadratec Part #: 17117-1020
K&N Part #: 77-1576KP
Description
The K&N 77 Series High-Flow Performance Air Intake is an aftermarket air induction systems designed for 2018-2019 Jeep Wrangler JL vehicles. This intake includes a free-flowing, mandrel-bent intake tube Intake in an attractive Chrome-Like Finish Made to Last with a Million Mile Warranty. K&N 77 Series intakes replace your restrictive factory air filter and intake housing. It will dramatically reduce air flow restriction by smoothing and straightening out the air flow, which then allows your engine to inhale a larger amount of air compared to your stock intake. This means more usable power and acceleration throughout your engine’s entire RPM range! All K&N 77 Series high-flow air intake kits include a washable, reusable air filter and offer guaranteed performance for your Jeep JL.

CARB Notice

  • Legal in California, or other states adopting California emissions standards, only for racing vehicles that may never be used, registered or licensed for use, upon a highway. Can not be shipped to California residents.
Details

Direct-Fit Upgrade: Replaces the Entire restrictive factory and intake housing.

High-Flow Performance: This Intake is Guaranteed to Increase Horsepower: Estimated Horsepower Gain: 8.8 HP @ 5400 RPM.

K&N High-Flow Air Filter: A High-Flow Air Filter and Heat Shield that Installs into Previous Air Box Space is washable and reusable. The Oversized Cone-Shaped Air Filter can be Used for Up to 100,000 Miles before Servicing (Depending on Driving Conditions).

Mandrel-Bent Aluminum Tube: A Free-Flowing Intake Tube has an Attractive Chrome-Like Finish Made to Last. Air is Directed through the Intake Tube into Engine’s Throttle Body for Guaranteed Power Gain. The Intake Tube Accommodates the Factory Air Temperature Sensor and Replacement Silicone Crank Case Vent Hose.

Easy to Install: Installation can usually be done in 90 Minutes or Less using existing factory mounting points and a screwdriver, ratchet set and Several Wrenches.

Installation Notes
Installation Difficulty:
Skill Level 2 IconLevel 2Intermediate
Installation Time: 1-2 hours
Parts Included
  • Air Filter
  • Mandrel-Bent Aluminum Tube
  • Heat shield
  • All Hardware and Clamps
Warranty
Lifetime Limited Warranty
  • Engine Size: 3.6L Pentastar V-6
  • Shipping Weight: 11lb
  • Shipping Dimensions: 23in x 15in x 12in (L x W x H)
  • Jeep Gladiator (JT)

  • 2024 Jeep Gladiator (JT)
  • 2023 Jeep Gladiator (JT)
  • 2022 Jeep Gladiator (JT)
  • 2021 Jeep Gladiator (JT)
  • 2020 Jeep Gladiator (JT)
  • Jeep Wrangler 2-Door (JL)

  • 2024 Jeep Wrangler 2-Door (JL)
  • 2023 Jeep Wrangler 2-Door (JL)
  • 2022 Jeep Wrangler 2-Door (JL)
  • 2021 Jeep Wrangler 2-Door (JL)
  • 2020 Jeep Wrangler 2-Door (JL)
  • 2019 Jeep Wrangler 2-Door (JL)
  • 2018 Jeep Wrangler 2-Door (JL)
  • Jeep Wrangler Unlimited 4-Door (JL)

  • 2024 Jeep Wrangler Unlimited 4-Door (JL)
  • 2023 Jeep Wrangler Unlimited 4-Door (JL)
  • 2022 Jeep Wrangler Unlimited 4-Door (JL)
  • 2021 Jeep Wrangler Unlimited 4-Door (JL)
  • 2020 Jeep Wrangler Unlimited 4-Door (JL)
  • 2019 Jeep Wrangler Unlimited 4-Door (JL)
  • 2018 Jeep Wrangler Unlimited 4-Door (JL)
Share Your Thoughts
Review Summary
4.90909
Based on 11 reviews
Shared Media
Questions

Customer Submitted Photos

Share Another Photo

K&N 77 Series High-Flow Performance Air Intake Reviews

Questions