Oracle Lighting
Oculus 9" Bi-LED Projector Headlights with White Halo Ring & Matte Black Bezel, Flush Mount Tail Lights & Racetrack Panel in Standard Red for 20-24 Jeep Gladiator JT
Stylish, incredibly bright, DOT SAE compliant Oculus 9" Bi-LED Projector Headlights for your Jeep Wrangler JL or Gladiator JT are here! Aesthetically, these LED headlights look like a wicked custom setup that is sure to draw the eyes, and envy, of fellow Jeepers and car enthusiasts alike. Throwing down 3200 lumens low, 5200 lumens high, in a 5500K color temp these lights will pierce through the darkness to reveal obstacles and wildlife ahead. The Bi-LED projector design allows for a very bright output while not blinding oncoming traffic (when aimed properly) due to the sharp cutoff. Power draw is only 36-watts which is a significantly lower power demand than your factory headlights. Even with the lower power consumption, the LED's provide brighter light output than factory. Utilizes both passive and active cooling methods to keep the LED operating temps low, which extends their life. Installs using factory mounting hardware. Wiring is Plug & Play into the factory connector without additional relays or harnesses. Wiring of the halo-ring requires just a ground and simple add-a-fuse which is included in this kit. No dealer reflash required! Heated option automatically engages when temps drop near freezing. The heating elements help reduce or completely prevent snow and ice buildup which can cause dangerous driving situations, forcing you to pull over and clear off the lights often. Take one of the chief concerns of bad weather driving out of the equation so you can focus on more important factors of driving in adverse weather conditions.
Available models include: White halo with bezel color options as well as a heated option; White halo with amber switchback turn signal; ColorSHIFT without controller; ColorSHIFT with a simple remote; ColorSHIFT with a Key Fob remote; ColorSHIFT 2.0; ColorSHIFT WiFi; ColorSHIFT BC1. ColorSHIFT models allow control over the outer halo ring, inner halo ring, and projector backlighting! Each one of those features utilizes a separate output cable. These cables can be connected either together (All 3 produce the same color) or on separate Channels - depending on your preference and the ColorSHIFT model you purchase. To have different colors for each zone (Outer halo, inner halo, projector backlight), you need to purchase the ColorSHIFT 2.0 model or purchase the BC1 or WiFi with 2 additional controller units (sold separately).
ColorSHIFT 2.0 uses an infrared remote to control the lighting. This setup allows you to have different colors for each zone (Outer halo, inner halo, projector backlight).
ColorSHIFT WiFi uses your phone & a free app to control the lighting. To have different colors for each zone (Outer halo, inner halo, projector backlight), you need to purchase the ColorSHIFT 2.0 or purchase the BC1 or WiFi with 2 additional controller units (sold separately).
ColorSHIFT BC1 is Bluetooth and uses your phone & a free app to control the lighting. To have different colors for each zone (Outer halo, inner halo, projector backlight), you need to purchase the ColorSHIFT 2.0 or purchase the BC1 or WiFi with 2 additional controller units (sold separately).
Please note that these ColorSHIFT features are intended for off-road “show” use only and are not compliant for street use. Most states require forward-facing lighting to be white or amber when on public roads.
Will these work with 2024 Jeep Wrangler 4XE that came with standard halogen headlights
Quadratec
Yes, they will work. However, you also need to get a programmer to re-program the computer for LED headlights. This is a programmer that will change for LED: https://www.quadratec.com/p/zautomotive/tazer-jl-mini-wrangler-jl-z-tzr-jlm
DAVID K.
I have a 2020 JLU with the LED option and Halo’s. I want to move to a heated lens. Will these integrate with the factory Halo connections
Quadratec
The design is 100% plug-and-play, with no additional wiring required for the heating element. The heating function automatically activates when the headlight is on and the ambient temperature approaches freezing. An amber LED status light illuminates when the heating function is active, and temperature sensors are integrated into the lights to regulate the heat for peak performance. When the front lens cover is heated to the optimal temperature, the heating function automatically shuts off and will cycle back to active mode when the temperature drops again.
Peter K.
Do they include the lens heater?
Quadratec
5839-111 is the option that would have a heated lens. Our part number is 97009-9341. Thanks for your inquiry.