Skip to main content
Home » Jeep Lighting, Lenses, Bulbs » Headlights » LED Headlights » Oracle Lighting Oculus 9" Bi-LED Projector Headlights
« Back to product
Will these work with 2024 Jeep Wrangler 4XE that came with standard halogen headlights
Yes, they will work. However, you also need to get a programmer to re-program the computer for LED headlights. This is a programmer that will change for LED: https://www.quadratec.com/p/zautomotive/tazer-jl-mini-wrangler-jl-z-tzr-jlm
I have a 2020 JLU with the LED option and Halo’s. I want to move to a heated lens. Will these integrate with the factory Halo connections
The design is 100% plug-and-play, with no additional wiring required for the heating element. The heating function automatically activates when the headlight is on and the ambient temperature approaches freezing. An amber LED status light illuminates when the heating function is active, and temperature sensors are integrated into the lights to regulate the heat for peak performance. When the front lens cover is heated to the optimal temperature, the heating function automatically shuts off and will cycle back to active mode when the temperature drops again.
Do they include the lens heater?
5839-111 is the option that would have a heated lens. Our part number is 97009-9341. Thanks for your inquiry.
If my 2021 JT does not have LEDs, will I need any other wiring or adaptors?
No, they will not. Thanks for your inquiry.
Since i have 3 bc1 controller do i connect both outer halo to only one of the bc1 ports or do i need to use 2 ports per bc1 controller?
Here is a direct link to Oracle support for your best troubleshooting information. Oracle Support Sorry for any difficulties with the product.
What bezel color is the white halo/amber switch back model
White, and Amber, Thank for your question.
Do you have to have your jeep reflashed by the dealer if you didn't have LED's from the factory?
Everything is integrated into the Oculus headlights and your Jeep does Not need to be reflashed by the dealer.
With the DRL's wired exactly as instructed will thr halos be on all the time (lights on or off, high or low beams)?
When you use the additional wiring harness included in the kit and wire to the F52 fuse the halo will function as a daytime running light. The halo will stay on even when your high beams or low beams are turned on.
With the simple controller, what functions are available?
You would be able to control a single zone of led lights by the RF remote.
Will these fit on a 2016 Jeep Wrangler JK?
No they will not, the JK Wranglers use 7" headlights, these are too large