Rival 4x4 Aluminum Rear Bumper for 18-25 Jeep Wrangler JL
The Rival 4x4 Aluminum Rear Bumper is designed to protect the rear of your Jeep Wrangler JL. Replacing the factory plastic bumper with a strong and lightweight aluminum bumper. The included receiver hitch is rated at 6,000 lbs (3 tons) to meet all your towing needs (Consult your owner's manual for maximum vehicle towing capacity and recommended towing procedures). This bumper also has reinforced tow hooks for recovery, Hi-Lift jack slots, and sensor knockout holes. It even includes a license plate mount that will accept the factory original license plate light.
This premium bumper is built from 6mm thick aluminum with 5mm thick steel mounting brackets. Designed for offroad abuse and trail reliability on all your overland adventures. A quick and easy installation that mounts to the factory position and finished in a corrosion-resistant powder coat for long-lasting durability.
Please Note: Bumper has knockouts to accept factory sensors.
Strong Lightweight Aluminum: A lightweight rear bumper that is corrosion resistant and built to last. The stubby bumper weighs in at a mere 66 lbs while the full width bumper only weighs 75 lbs. Keeping the rear of your Jeep from experiencing sag while giving you a stout rear bumper.
Offroad Ready: The reinforced towing points allow for offroad recovery in almost any situation. These large tow hooks make it easy to attach a tow strap when you are in a bind. They also include slotted D-Ring holes for additional recovery options (D-rings are sold separate). This bumper features reinforced Hi-Lift points for even more overland versatility.
Quick & Simple Installation: This ultimate rear bumper offers an easy installation that mounts to the factory original position on your Jeep. Allowing you to enjoy your bumper and get back on the trails quickly. No modification or drilling necessary.
- Features: 2" Receiver, D-Ring Shackle Brackets, License Plate Mount, Powder Coated, Sensor Holes, Tow Hooks
- Color: Black
- Style: Rear Bumper
- Material: Aluminum
Jeep Wrangler 2-Door (JL)
- 2025 Jeep Wrangler 2-Door (JL)
- 2024 Jeep Wrangler 2-Door (JL)
- 2023 Jeep Wrangler 2-Door (JL)
- 2022 Jeep Wrangler 2-Door (JL)
- 2021 Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2025 Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
Rival 4x4 Aluminum Rear Bumper Options
| Part Number | Catalog # | Bumper Width: | Price | ||||||
|---|---|---|---|---|---|---|---|---|---|
| 2D.2723.2-NL | 12255-0010 | Full Width Bumper | $749.00 | ||||||
| 2D.2709.2-NL | 12255-0011 | Stubby Bumper | $699.00 |
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Rival 4x4 Aluminum Rear Bumper Reviews
A great bumper with an integrated hitch. License plate bracket reuses OEM license plate light and harness.
Easy install and it turned out great. I replaced the tow hook mounting bolts with the stainless ones off Amazon that were 5 mm longer. IMHO look better as well. When installing the brackets to the frame, I recommend left side first then right. Tighten the bottom bolts, then top then front. Install license plate mount, but do not tighten until you check alignment with the rear bumper. Once you align it to match where you want tighten it and reinstall the rear bumper on the mounts. I tucked the wire up into the frame and zip tied it. Otherwise it’s just a direct plug-in. You can use a couple of the supplied, zip ties and adhesive pads to hide the wiring from the license plate and affix it to the bumper. On a sidenote, if you’re ordering front and rear bumpers, I recommend installing the rear first so you have an idea of how rivals instructions work. There are also some videos on YouTube that may help you. Thank you quadratec for answering my questions before purchase.
The bumper is solidly constructed and looks great. There were a few issues with the instructions not matching up 100% to the parts listing I got. This was due to a new revision in the instructions which are updated on the website. Be aware if you have the back up sensors you will need to either buy an extension for the the license plate light(if you can find one) or undo a large portion of the light/back up sensor harness. Otherwise the relocation of the license plate will not have enough cable by a long shot. I wish this was called before I ordered as I had to wait a few days for the loom tape to arrive after reworking my harness.
Questions
