Receiver Hitch Compatible: The bumper is notched in the bottom center for a perfect fit with the factory hitch and aftermarket hitches. Allowing you to maintain your factory tow rating to haul all your other toys. The hitch is Not included with the bumper, so be sure to purchase one unless you already have it installed on your Jeep.
License Plate Mount: The included license plate mount installs on the driver side to existing holes on the bumper. The bolt-on design also allows you the ability to use other license plate mounting options if preferred. Be sure to also purchase the license plate light which is sold separately for proper visibility.
Large Spare Tire Opening: Compatible with most tires up to 35" mounted in the original position. This large opening measures 39" at the top descending 5" to a width of 32" at the bottom outer edge of the bumper. It also functions as a convenient step to load your roof rack with ease once the spare tire is hinged open. Giving you ample room for both feet to be firmly planted.
No Drill Installation: A quick and easy bolt-on installation that does not require any drilling or modification. For the do it yourself installer and can be mounted with basic hand tools.
Note: Be Sure to Purchase the License Plate Light which is Sold Separate.
The Quadratec QRC Rear Bumper offers trail-ready strength for the rear of your Jeep Wrangler JL. The one-piece construction is fully welded using 6 gauge steel plate with 2” x .105” thick tube for the mandrel bent corners. Giving your Jeep additional protection on all your overland expeditions.
This bumper allows for additional spare tire clearance including most tires up to 35 inches tall. Allowing you to install a full-size spare which is necessary for the Jeep life.
A simple installation that bolts directly to existing mounting points and is compatible with all brands of receiver hitches (Hitch is sold separately). This bumper is e-coated for corrosion resistance and finished with a durable light textured black powder coat.
- Features: License Plate Mount, Powder Coated, Without Sensor Holes
- Color: Black
- Style: Full Width Bumper
- Material: Steel
- Shipping Weight: 77lb
- Shipping Dimensions: 76in x 19in x 10in (L x W x H)
Jeep Wrangler 2-Door (JL)
- 2025 Jeep Wrangler 2-Door (JL)
- 2024 Jeep Wrangler 2-Door (JL)
- 2023 Jeep Wrangler 2-Door (JL)
- 2022 Jeep Wrangler 2-Door (JL)
- 2021 Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2025 Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Quadratec QRC Rear Bumper Reviews
Looks great with the matching front bumper
Have on another jeep
yes you can install rear sensors if you're willing to drill the bumper and spend 10 extra dollars on parts available on Quadratec website. get the plastic bezels from the Mopar steel bumper, drill a 1-1/16" hole and the rest is plug and play. you may need to cut the tape from the original wire harness to allow some slack between the sensors but it will fit. I did it!