Injen EVO5005 Evolution Roto-Molded Air Intake with SuperNano Dry Filter for 18-25 Jeep Wrangler JL with 3.6L
The Injen Technology Evolution Roto-Molded Air Intake with SuperNano Dry Filter for the Jeep Wrangler JL 2-door & Unlimited JL 4-door 3.6L engine, is a state of the art performance intake system. This Intake includes a Fully serviceable Injen SuperNano-Web dry air filter. The durable Roto-Molded polyethylene housing and intake tube gives your Jeep that aggressive under the hood look as well as a formidable intake growl under acceleration. This Intake kit has impressive Dyno Proven gains of up to 11 hp and 11 ft-lbs. of torque. You can easily add on other performance products such as a snorkel without doing any recalibrations. The installation process is made easy by including all necessary stainless steel hardware and automotive grade urethane couplers. The Evolution cold air intake is made right here in the USA and Injen Technology backs this product with a Limited Lifetime Warranty.
Note: Does not fit on eTorque models
CARB Notice
- Legal in California, or other states adopting California emissions standards, only for racing vehicles that may never be used, registered or licensed for use, upon a highway. Can not be shipped to California residents.
Power Gains: This Cold Air Intake is Dyno Tuned For Max Power with gains in HP Up To 11.0 & Increased Torque Up To 11.0 ft./lbs.
SuperNano-Web dry: This air filter features a revolutionary synthetic nanofiber filter media that increases airflow, while capturing and holding more dirt than conventional air filters. The Dry filter is easily cleaned with a shop vac or low pressure air and does not require oiling after cleaning.
Simple Bolt-On-Installation: The EVO5005 Cold Air Intake utilizes the ability to quickly adapt this intake to a fully-functional snorkel system (sold separately). The installation process is simple and does not require aftermarket tuning/recalibration.
Quality Construction: The Cold Air Intake is made in the USA from cross linked high density polyethylene for extreme durability.
Complete System: This System Comes w/Built-In Filter Monitor For Easy Cleaning, Automotive Grade Couplers, Hoses, Stainless Steel Hardware,Clamps and all Screws.
- Engine Size: 3.6L Pentastar V-6
- Shipping Weight: 12lb
- Shipping Dimensions: 28in x 17in x 13in (L x W x H)
Jeep Wrangler 2-Door (JL)
- 2025 Jeep Wrangler 2-Door (JL)
- 2024 Jeep Wrangler 2-Door (JL)
- 2023 Jeep Wrangler 2-Door (JL)
- 2022 Jeep Wrangler 2-Door (JL)
- 2021 Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2025 Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Injen Evolution Roto-Molded Air Intake with SuperNano Dry Filter Reviews
Felt the instant change in sound and power, love it!
Installation was very easy. I don't know if horse power has increased (wife says it has more power) but the sound alone was worth it. I have cleaned the filter a couple of times and the process was very easy. No dust in the tube on the throttle side of the filter, so it's doing it's job.
Quality product. I can't tell if there is any power difference but sounds excellent under acceleration. Would have given 5/5, but this intake is not intended for eTorque engines. The breather tube nipple is in wrong location. Breather tube line is hard plastic. Had to force the heck out of it for it to clip on. The force broke one of the two gray built-in retaining clips. Also there's a small kink in the line. So far no issue's, but surely the line will fail before 100k miles. Nowhere the Quadratechs website states this, but clearly stated on Injen's.
