Go Rhino D14506T Dominator D1 Side Steps for 18-25 Jeep Wrangler JL Unlimited
Easy Access: Gives you a full length side step with a full length drop down step to easily get in and out of your Wrangler JL even if lifted with oversize tires.
Protection: High quality black powder coated steel protects your rocker panels from whatever obstacles you may come across on the trails. The black powder coat finish will help protect from corrosion as well as your typical scrapes from outdoor debris.
Easy Installation: These side steps use the factory step and rock rail mounting locations so there will be no drilling or other modifications needed to be made to your Jeep ensuring that you will be back on the road in no time with a stylish looking JL to stand out from the crowd.
- Features: Step
- Armor Type: Rocker Guards, Side Step
- Material: Steel
- Shipping Weight: 80lb
- Shipping Dimensions: 73in x 10in x 8in (L x W x H)
Jeep Wrangler Unlimited 4-Door (JL)
- 2025 Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Go Rhino Dominator D1 Side Steps Reviews
Quality & Durability
Looked nice
Highly suggested that you read all other reviews and just use the installation instructions only to sort and check all your parts. I installed these on my 2023 Wrangler 4xe and it’s a good fit but please note the following: you really must mount the three brackets loosely to the slider step before you assemble everything to your vehicle. I had to switch brackets M and L on one side because the instructions didn’t match the M8 hole positions and it was A PAIN to attach the bracket to the nut plates that keep falling back and then attach the slider step. Seriously, save yourself two hours and attach those three brackets loosely to the step FIRST. The bracket labeled M is the front one, the bracket labeled L is the back one on my 2023 4xe (see pictures). Make sure to put a black washer on each side of the body pinch mold. From front to back it’s A, C C, B, D.
Tighten the three M8 hex bolts (H), then tighten all 6 of the black hex bolts, slide the step into the spot where you want it, push the entire slider step up and hold this in place while you tighten the six socket head screw caps (E).
Questions
