Skip to main content
Home » Jeep Lighting, Lenses, Bulbs » Tail Lights » LED Tail Lights » Quadratec LED Tail Light Kit

Reviews for Quadratec LED Tail Light Kit for 97-06 Jeep Wrangler TJ

< Back to the product
Daniel S.
7/27/2017
5

5 years ago I bought some leds on eBay they weren't anywhere near as nice as the Quadratec leds. They finally quit so replaced them with the Quadratec leds much better quality and the relay works better than modified relay thanks great product!
Gerald A.
7/27/2017
5

great LED lights, very bright bolt on install. simple instructions on replacing relay.
REX R.
7/27/2017
5

work great, nice product
TERRY M.
7/27/2017
5

Really nice lights. These are much brighter than the factory bulb type. The connectors fit the stock wire harness perfectly.
Janie S.
7/18/2017
5

The lights are great! Getting them to work with my Smittybilt tail light guards took a bit of ingenuity.

Here's how to do it.
1. Drill out the threaded holes in the body with a 5/16" drill.
2. Use 1/4-20 1-1/4 lg carriage bolts that you can install in the lights before inserting them in the tail light and thru the guard.
3. Use silicon caulk to create a moisture barrier around the bolts and to hold them in place.
4. So, remove the tail light cover.
5. Insert and caulk the carriage bolts in the tail light.
6. Replace the cover.
7. Carefully put the tail light in the guard.
8. Use a washer and nut to tighten down the carriage bolt and leave it for a while for the caulk to set up
9. After the carriage bolts seem to be set, remove the nuts
10. Insert the bolts thru your three holes in the Jeep body.
11. Carefully reach up in the body behind the tail lights and get a nut started on each bolt so they don't get away from you if the assembly is accidently wiggled (this is the voice of experience talking)
12. Use a washer and lock washer with the nut and tighten carefully.
13. Make sure to level up the tail light/guard assembly.

Works great! And, I promise the three carriage bolts with lock washers is more stable than the original three sheet metal screws.

Lights are bright and clear. What a great upgrade to my 01 TJ.
12.
Logan M.
7/17/2017
5

Love them and installed easy
Joe M.
6/20/2017
5

Easy install, bright, fit nice, wiring snaps into factory connectors no problem.
PHILIP B.
6/20/2017
5

Great up grade.Matched up nice with the Quadratec LED head lights.Took about 1 hour to install.My tail light wiring pig tail was very short but nothing that could not be fixed ..Would buy again.......
David V.
6/16/2017
5

Quality, fit and finsh 2nd to none. Bright, day or night. A Big upgrade over O.E. . I Would buy again, and have recommended these LED Brake light's to a number of friends.
John R.
5/25/2017
5

Like most LED light replacements, you want to know the specific number of LED's so you can decide if they are really going to be brighter than the OEM incandescent tail lights. I contacted Quadratec and was told that they did not know how many LED's were in each lamp and it would involve taking the lens cover off of the lamp and they could not do that . I took a chance and ordered the kit - I'm glad I did!
Here are the specs:
16 RED LED's for the taillight AND double bright stoplight.
2 Additional RED LED's for side marker.
21 White LED's for the backup lights.
4 White LED's for the license plate light (L/H only on my TJ).
These were 100% "plug & play" for my 2002 Wrangler. The 'bonus' electronic flasher absolutely stops 'hyper-flashing' of the turn signals - no messy diodes needed.
Bottom line, these tail lights are at least twice as bright as the OEM lights, IMO, and are well made and easy to install, you won't be disappointed.