Skip to main content
Home » Jeep Lighting, Lenses, Bulbs » Auxiliary Lighting » Auxiliary LED Lighting » Oracle Lighting Rear Bumper LED Reverse Lights

Reviews for Oracle Lighting 5874-504 Rear Bumper LED Reverse Lights for 18-22 Jeep Wrangler JL

< Back to the product
Steve O.
12/20/2021
2

The lights worked great for a few weeks and put out a great bit of light. However, now they work only intermittently. Sometimes the lights will turn off while backing up for no apparent reason. The only way to get them back on is to stop the car, shut the engine off and restart. I am not sure if there is water in them or if it is related to cold weather (problems surfaced when it dropped to 32 degrees). Disappointing that these are not consistently working.
Roberto A.
11/23/2021
2

1) the instructions do not tell you that the pictures in the instructions are with the bumper removed.
2) nowhere do they give you instructions on how/where to run the wires. They push this as a simple mod (think beginners) but you are on your own here.
3) the t connectors are flimsy. If you can avoid them I would encourage you to do so
My drivers side briefly illuminates then both the LED and the Jeep back up light turn off.
The pain to gain ratio is not there with this one and I have done a ton of mods on my Jeep and I’m not adverse to a challenge. This was an exercise in frustration.
Tony G.
5/1/2023
1

Does not seem to fit the JL steel bumper. Passenger side fit correctly, drive side did not. Also, if attempting to install on steel bumper you will need to remove bumper to access. Contacted Oracle customer service to inquire about a replacement or ability to purchase just the driver side, no help from their customer support. Buyer beware!