Reviews for Oracle Lighting 5874-504 Rear Bumper LED Reverse Lights for 18-22 Jeep Wrangler JL
These are FANOMINAL!! The throw light at least 1/4 mile back. These should be Standard on the JLs
Great product once installed. Getting to the back screw to release the reflector and to install the light requires an angled wrench with a shallow socket. Used electrical tape to hold the screw in the socket. If the screw drops you are taking apart the whole bumper for the install. Not difficult if you have the proper tools.
The functionality of it. The factory reverse lights are not bright enough
These are awesome. I recently backed my 2021 Sahara into a Tacoma, despite being a self-proclaimed excellent driver AND having the sonar/radar/sensor package. The stock backup lights were awful, one of my few complaints about the JL. These fixed the problem.
A little tough getting the bolts in/out of the bumper without taking the bumper off, but it was just some time. Plugins worked great, everything else was easy.
High quality build on these little lights. Couldn't be happier.
Unique product solving a lack of rear lighting in a unique way.
They work great and put out a ton of light. The installation is a challenge. Since I have a trailer hitch it necessitated removing the bumper which was very easy. Getting a socket onto the reflector bolts required the use of a swivel because of the bumper reinforcements bar. The reflectors popped out easy and the new lights snapped into place without much effort. Be careful with the wires as they could get pinched when the light is snapped into place. Getting the light bolts in was an issue so I removed the bolts holding the reinforcement bar to the plastic bumper, this gave me a straight shot to get the bolts into the lights. The bumper went back on without any issues. The only problem with these lights is that the wires are a bit short. They were long enough to make the connections but I had to route wires around finding the shortest path. If the wires were about 6 inches longer there would be more than enough to route the wires easily.
Looks good. The left side needed some help getting into the spot. Had to trim some of the light. But they are bright and work great.
Great improvement on the reverse lights for my 2020 Wrangler JL Rubicon. I did not tap into the vehicle's brake wiring, I made my own custom wiring harness and hooked directly into my Trigger 6 Shooter system. I figure why blind the poor souls at the store parking lot when I can do that to the guy who loves to tailgate me...(just teasing - maybe not). One word of advise. Remove your bumper before starting. The only bolt you have to remove is a bear to remove and reinstall. I spent way too much time fighting that bolt than I should have.
Perfect fit for 2018 JL and what an amazing upgrade. Back up camera is so much easier to see where you are going at night. Install very simple........Except removing the one bolt holding each reflector in which created a bit of a time consuming challenge. Once you figured out the proper tool to use it was not bad.
Will see when installed