Reviews for Quadratec Tow Hitch Wiring Harness for 18-24 Jeep Wrangler JL
This wiring harness arrived quickly. I am '''very'' impressed on how well it is put together. Even the split loom and harness hangers are already on the wires from the factory. The only modification that I plan to change is the 12 volt power lead. The directions recommend running the wire all the way up front to connect directly to the battery. I plan to splice that wire to into the accessory plug that is in the back of the Jeep. My belief would be that the manufacturer designed this to be totally plug and play by going directly to the battery. Splicing wires is not plug and play. I am too old to crawl under the Jeep to fish a wire all the way from back to front. So I will go the shortest route and splice into the back of the rear accessory plug. If my method causes any unforeseen issues I will update this review. 1/9/2021
Great product and very well made!!!! Install took a little longer than advertised but I'm a little anal and made a few modifications. With that being said, the only two things I would change in the instructions would be pg 2, fig 6 was a little confusing and fig 9 on pg 3. Like others said, the holes are on top of the cross member and a little difficult to find. Laying the wire against the cross member and matching the wire ties distance will hope your finger to find the holes. All wire ties DO have a hole to secure to so keep looking if you're unsure. All pictures displayed in instructions are very accurate, so if you take your time and follow the instructions, no problems. Great product!
Great instructions and the harness has everything hooked together nicely whereas other kits do not. Surprisingly mine didn’t work at first but after a bit of troubleshooting found that it was the ground. My bolt that the instructions say to connect to was completely painted so there was no bare metal connection. I sandpapered the bolt and afterwards everything worked great. I highly recommend this.
The wiring harness is very well made. All you need to do is follow the instructions. I would add a comment to the instructions that the holes on the cross member are on the top. Also if you have to slide along the ground as I did 2 hours is more realistic. Other than that, a great product. I saved $500 not having the dealer do it.
Very simple with great in-color picture instructions, very well built and nice quality. Works awesome
Easy install, well made harness with pre-attached clips to mount the harness directly where the factory harness would go. I went with this option because of its price and because the kit comes with wire loom already installed. Good quality and worked well. Just took my time and routed the wire neatly along the frame away from the exhaust. Took me about an hour to install.
Excellent wiring kit. Simple plug and play. Installed easily on a 2DR Rubicon. Just follow the routing instructions and secure it along the way. Take your time and do it right.
Nice wiring kit. Easy to install, as everything is plug and play, other than having to run the harness to the battery. (I'm not sure why power could not be obtained from the 12v accessory socket in the rear of the Wrangler? Would make the wiring much easier.) Overall, good value.
Fair prices for good product.
Easy install. About an hour and change taking my time. Routing the wire to the battery was a piece of cake. I used a piece of 12 gage electrical wire to fish it to the engine compartment.