« Back to product
Brett T.
Can the d ring mounts be used for flat towing a jeep sahara?
![](/sites/all/themes/quadratec/logo.png)
No, they are not rated for flat tow bar use. Thanks for your inquiry.
Scott A.
Is there a skid plate that would work with this bumper?
![](/sites/all/themes/quadratec/logo.png)
Our sway bar skid has clearance to fit along with the QRC bumper. https://www.quadratec.com/p/quadratec/aluminum-modular-front-sway-bar-skid-plate-jeep-wrangler-jl. Thanks for your inquiry.
Sandi B.
Does this bumper have a skid plate? Or able to mount existing one. Or buy one to fit it.
![](/sites/all/themes/quadratec/logo.png)
The existing air dam does not work. This model in the following link fits along with our QRC bumper. https://www.quadratec.com/p/quadratec/aluminum-modular-front-sway-bar-skid-plate-jeep-wrangler-jl.
William H.
Can I mount this bumper on the Jeep first, then mount the winch later without having to remove the bumper to do so?
![](/sites/all/themes/quadratec/logo.png)
You can install the winch after bumper installation, yes. It's a bit more difficult to do this, versus having the winch installed first, but it is doable.
Britt F.
What will i need to make the factory fog lights from a 2018 JL wrangler fit?
![](/sites/all/themes/quadratec/logo.png)
The fog lights from the factory plastic bumper will fit this bumper. If you have the factory steel bumper then you will need to change your fog lights or run aftermarket LED's.
Cody G.
Will the X-BULL 12v Synthetic Rope Winch 13,000 lb work with this bumper?
![](/sites/all/themes/quadratec/logo.png)
This bumper is rated for winches up to 10,000 lbs.
Scott S.
Looking at getting this bumper for my 2021 80th anniversary Gladiator. What LED fog lights work well?
![](/sites/all/themes/quadratec/logo.png)
I would recommend Quadratec LED fog lights (part #97109.0012).
https://www.quadratec.com/products/97109_001X_PG.htm
Reed H.
Does the Smittybilt 98695 XRC GEN3 9500 lbs Winch fit with this bumper?
![](/sites/all/themes/quadratec/logo.png)
We have had reports that the control pack and wiring access is not ideal with the the Smittybilt 98695 XRC GEN3 9500 lbs winch. It can fit with some modifications but it is very tight against the grille. Thanks for your inquiry.
Dennis A.
will the original air dam for the JT fit on the stubby bumper? If no, what recommendations do you have for a aftermarket skid plate that matches with the stubby bumper?
![](/sites/all/themes/quadratec/logo.png)
The modular skid plate will work. Front Sway Bar Skid Plate
Tony R.
What is the winch bolt pattern dimensions? Will a Smittybilt X20 10K winch fit?
![](/sites/all/themes/quadratec/logo.png)
10 x 4.5 inches and yes the X20 will fit.