« Back to product
Richard O.
I put this bumper on a 2021 gladiator rubicon. After Installing I saw that the factory front skid plate will not fit. The lower part of the winch plate is in the way. Is there a front skid plate that is compatible with this bumper, or do I have modify the original? It looks as if the original skid plate would need to be notched out.
![](/sites/all/themes/quadratec/logo.png)
Yes, the Quadratec Sway bar skid plate will fit along with the QRC bumper. See the link.Quadratec Sway Bar Skid for JL Thanks for your inquiry.
Jomar F.
2021 jlu sport led fog lights have 3 20 screws I read other there LED light have 4 7mm bolts. With these lights still work. Also what skid plate is recommended
![](/sites/all/themes/quadratec/logo.png)
This bumper accepts both style fog lights. The Quadratec Sway Bar skid plate is able to fit JL models that are running this bumper. Thanks for your inquiry.
M M.
Does this come with all I will need to mount it and install the factory lights or do I need to buy something else
![](/sites/all/themes/quadratec/logo.png)
Yes. Note, that it will not allow fit of the fog lights that are equipped with metal Rubicon bumper. Thanks for your inquiry.
Tom B.
Does any body know the exact measurements for the full width Quadratic QRC front bumper #12057-0141. Not the shipping measurements.
![](/sites/all/themes/quadratec/logo.png)
70" long from end to end on the full length. 9" width for the main bumper width. At the D-ring mounting tabs it measures 11" in width. Thanks for your inquiry.
Todd A.
Will this fit a warn evo 10s winch?
![](/sites/all/themes/quadratec/logo.png)
It should. The EVO 10S sizing is the same as our Stealth winch which has been successfully fit in this bumper. Thanks for your inquiry.
George M.
I have a 2020 Jeep Gladiator Overland, will the QRC Front winch ready bumper (full width) fit my model of jeep? I would also like to know if I will need to have different shocks put on to support the additional weight of the bumper? Thank you
![](/sites/all/themes/quadratec/logo.png)
The bumper will fit your Jeep. If the bumper causes more rake or nose dive than desired you could use some 3/4 coil spring spacers to level the front end. Thanks for your inquiry.
Mandee G.
Will a Rough Country 9500-LB PRO SERIES WINCH SYNTHETIC ROPE fit this bumper?
![](/sites/all/themes/quadratec/logo.png)
It should, since it's dimensions are nearly identical to the size of our perfect fitting Stealth series winch. Thanks for your inquiry.
Christian O.
will this bumper fit X2O-10 Comp Gen2 Winch with Synthetic Line or XRC GEN3 12000 lbs Winch?
![](/sites/all/themes/quadratec/logo.png)
Yes, those winch varieties would be a successful fit in the QRC bumper. Thanks for your inquiry.
Karl S.
looking at Quadratec QRC Front Winch Ready Bumper for 18-22 Jeep Wrangler JL & Gladiator JT. i have a 2018 JL. i see on your picture it has two male bolts on either side and 2 holes. on my OEM bumber it has 4 bolts on each side. do i need to buy an additional bolt or is 2 on each side good?
also, my state requires a front license plate. in addition to the StoNSho Removable Quick Release Front License Plate Bracket for Bumpers with a Roller or Hawse Fairleads. would i also need to buy Factor 55 00019 Hawse Fairlead 1.5?
![](/sites/all/themes/quadratec/logo.png)
No added bolts are required. Sto N Show license plate mounts have not been specifically tested, but hawse style mounts and D-ring attachment license plate mounts are also offered if the StoNSho is not just right. Thanks for your questions.
Eric A.
I have a 2021 80th Anniversary JLU, what LED fog lights will work with this bumper and is any additional wiring needed?
![](/sites/all/themes/quadratec/logo.png)
You could reuse your factory fog light, but if converting to an LED, our pair in the following link will fit along with this bumper and will not require additional wiring. Quadratec LED Fog Lamps Thanks for your inquiry.