Ten Factory Front Axle Tube Seals for 84-18 Jeep Vehicles with 30 Spline Dana 30/44 Front Axle
Description
An updated design of a functional product that helps to keep mud and debris out of your front axle tubes, these TEN Factory Axle Tube Seals are available in Red, Black and Silver.
Popular Similar Items
Details
- Materials : Billet Aluminum and Rubber
- Measurement A: 36mm (1-7/16") Seal Depth
- Measurement B : 20mm (13/16") Stick-Out Depth
- Grease Fittings : Included and installed, Replacements are M8 x 1.00 x 15.88mm
- Axle Model: Dana 30, Dana 44
- Axle Position: Front
*Please make a selection above to view weight, dimensions, specs of a specific product
Jeep Cherokee (XJ)
- 2001 Jeep Cherokee (XJ)
- 2000 Jeep Cherokee (XJ)
- 1999 Jeep Cherokee (XJ)
- 1998 Jeep Cherokee (XJ)
- 1997 Jeep Cherokee (XJ)
- 1996 Jeep Cherokee (XJ)
- 1995 Jeep Cherokee (XJ)
- 1994 Jeep Cherokee (XJ)
- 1993 Jeep Cherokee (XJ)
- 1992 Jeep Cherokee (XJ)
- 1991 Jeep Cherokee (XJ)
- 1990 Jeep Cherokee (XJ)
- 1989 Jeep Cherokee (XJ)
- 1988 Jeep Cherokee (XJ)
- 1987 Jeep Cherokee (XJ)
- 1986 Jeep Cherokee (XJ)
- 1985 Jeep Cherokee (XJ)
- 1984 Jeep Cherokee (XJ)
Jeep Wrangler (TJ)
- 2006 Jeep Wrangler (TJ)
- 2005 Jeep Wrangler (TJ)
- 2004 Jeep Wrangler (TJ)
- 2003 Jeep Wrangler (TJ)
- 2002 Jeep Wrangler (TJ)
- 2001 Jeep Wrangler (TJ)
- 2000 Jeep Wrangler (TJ)
- 1999 Jeep Wrangler (TJ)
- 1998 Jeep Wrangler (TJ)
- 1997 Jeep Wrangler (TJ)
Jeep Wrangler (YJ)
- 1995 Jeep Wrangler (YJ)
- 1994 Jeep Wrangler (YJ)
- 1993 Jeep Wrangler (YJ)
- 1992 Jeep Wrangler (YJ)
- 1991 Jeep Wrangler (YJ)
- 1990 Jeep Wrangler (YJ)
- 1989 Jeep Wrangler (YJ)
- 1988 Jeep Wrangler (YJ)
- 1987 Jeep Wrangler (YJ)
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited (LJ)
- 2006 Jeep Wrangler Unlimited (LJ)
- 2005 Jeep Wrangler Unlimited (LJ)
- 2004 Jeep Wrangler Unlimited (LJ)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
Ten Factory Front Axle Tube Seals Options
| Part Number | Catalog # | Price | |||||||
|---|---|---|---|---|---|---|---|---|---|
| MG21102 | 52420-9000 | Red | $73.99 | ||||||
| MG21103 | 52420-9001 | Black | $59.99 | ||||||
| MG21104 | 52420-9002 | Silver | $61.99 |
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Ten Factory Front Axle Tube Seals Reviews
Derek R.
3/16/2022
Price was right! Guess the trail will tell the tale as to the quality
Thomas B.
3/16/2022
Works
John C.
2/15/2022
Good quality
Questions
DAVE M.
Pardon my confusion, but it is my understanding that the Dana 30's on Jeep JK's are 27 spline, yet this seal is listed as being for a 30 spline. Not sure that the spline count matters in this case because its a seal, but would like to clarify before ordering for my 2012 JK Sport S. Thanks!
Dana 30 axles are 27 spline and narrow axle shaft, upgraded aftermarket Dana 30 axles are available in 30 spline to match aftermarket lockers for better performance. Those upgraded shafts are required for these to fit a Dana 30.
Brandon L.
Will these still work with axle sleeves?
No they will not.
Bill K.
Will they fit 94 yj dana split axle with the shift fork the last set I bought didn't fit I over looked the fine print
No. These are meant for the non-CAD Dana 30. You would have to convert to a one piece axle shaft to have these work.
