Tuffy Security Products Single Compartment Overhead Security Console & Conceal Carry Security Drawer for 97-06 Jeep Wrangler TJ & Unlimited (No flip seat)

The overhead console features a lockable compartment that is secured by a double bitted 10 tumbler lock with built in weather seals. A bolt in stereo mounting tray makes installing a DIN mount stereo or CB radio a breeze. Each console is protected by a durable textured powder coat finish and mounting hardware is provided.Bolts to windshield frame on stock Jeep CJ and Wrangler or will U-bolt to a 2 1/2" or smaller full roll cage. Console is expandable and will fit in a space measuring between 28"-36.5".Exterior Dimensions: (Length is Expandable) 28" to 36 1/2" L, 10 3/4"W, 4 1/4"H (front) 3/4"H (rear)
Interior Dimensions:Compartment is pre-cut for DIN Mount Stereo 10" Depth, 7 1/4"W, Height adjustable 2 1/8" - 2 5/8"
Tuffy's Conceal Carry Security Drawer high security 16 gauge steel security drawer mounts under the drivers side seat in a Jeep TJ & LJ (No flip seat). The formfitting design of the Tuffy lockbox has over 336 cubic inches of lockable storage. It's secured contents are easily accessed by maneuvering the drawer open and closed on the smooth ball bearing slides using the convenient pull lever.
Featuring Tuffy's Pry-Guard Locking System with a 10 tumbler double bitted security lock with built in weather seals. The design incorporates a heavy duty fully extending slide system, weather seal & welded construction. A formed rib in the enclosure additionally strengthens the locking system.
Mounts inconspicuously under the drivers side seat in a Jeep TJ (No Flip Seat) & LJ (No Flip Seat) out of apparent site of would be thieves. Uses the factory hardware without drilling. The drawer must remain locked while operating the vehicle. Manufactured by Tuffy in the USA.

• Over 336 Cubic inches of lockable storage space
• Exclusive 10 tumbler double bitted lock with built in weather seals
• Pry-Guard locking system featuring 1/8" thick welded steel components
• Pull lever for easily opening and closing the drawer
• Formed rib in the enclosure additionally strengthens locking system
• Stealthy design is hidden under the seat from prying eyes
• Welded 16 Gauge steel construction
• Easy install, no drilling
• Durable texture powder coat
• Heavy duty smooth rolling ball bearing slides
• Weather & dust seal
• Drawer Exterior Dimensions: 17 1/4" L, 8 1/4" W, 3 3/16" H
• Interior Dimensions : 16 13/16" L, 7" W, 2 7/8" H (2 1/16" Clearance under latch bracket)

Installation Notes

Installation Difficulty:

Level 2Intermediate

The console is expandable to fit between roll bar and windshield. Mounts to factory holes, no drilling required.
Tools Needed
1/2" Socket and Ratchet
T-50 Torx socket or wrench
1/8" Allen wrench
3/8" Wrench
Flat head screwdriver

Installation Time: 1-2 hours