Skip to main content
Home » Jeep Bumpers » Rear Bumpers & Tire Carriers » Rear Bumpers » ARB Rear Modular Bumper in Black

ARB 5650310 Rear Modular Bumper in Black for 87-06 Jeep Wrangler YJ,TJ & Unlimited

Quadratec Part #: 12000-2011
ARB Part #: 5650310
Description
The latest TJ/YJ Jeep ARB rear bar has been designed to be simple and light weight with the ability to add a swing away tire carrier that takes the weight of the wheel off the rear door. Incorporating two 20mm recovery eyelets designed to receive a 5.25 ton shackle pin and two Hi-Lift jacking points, the rear bar can be fitted as a protection device on its own, allowing the original spare to remain mounted to the rear door. Alternatively, the rear bar can be optioned with the new “catchless” design tire carrier which can carry up to 35 inch spare tire and rim combinations. The optional tire carrier opens automatically when the vehicle tailgate is opened and has adjustment for up to 1 inch body lift kits. Manufactured from 3mm laser cut and folded steel sheet, the upswept wings give superior departure angle while protecting the rear quarter panels from damage. The center pan section is recessed to allow for fitment of larger than standard tires to the carrier. The rear bar includes a tow hitch rated to 2000 lbs for TJ/YJ Jeep models and 3500 lbs for TJ/YJ Jeep Unlimited models (long wheelbase.) Tire Carrier sold separately.
Details

Recovery Points:
Recovery points manufactured from flame cut 20mm steel plate pass through the rear bumper and are welded to the mounting bracket uprights for extra reinforcement. The rear bumper recovery points include an elongated slot so that the shackle bow can be passed through the point, allowing the shackle to pivot when pulling from slight angles.

Hi-Lift Jack Points:
Designed primarily for Hi-Lift brand jacks, the Hi-Lift jacking point is reinforced with 4mm steel plate to prevent distortion or damage. When the jack leg is inserted into the point, the lip of the jack foot locates past the internal reinforcing plate to prevent slippage. When not in use, jacking points are fitted with a rubber plug.

Knock Outs:
Pre laser cut holes are provided in the rear bumper for fitment of the wheel carrier. If no carrier is to be fitted, the knock out sections are simply left in place.

Installation Notes
Installation Difficulty:
Skill Level 3 IconLevel 3Advanced
Installation Time: 4-5 hours
Parts Included

Rear Bumper

Warranty
3 Year Limited Warranty
  • Features: Integrated Receiver
  • Color: Black
  • Style: Modular Bumper
  • Material: Steel
  • Shipping Weight: 78lb
  • Shipping Dimensions: 65in x 14in x 10in (L x W x H)
  • Jeep Wrangler (TJ)

  • 2006 Jeep Wrangler (TJ)
  • 2005 Jeep Wrangler (TJ)
  • 2004 Jeep Wrangler (TJ)
  • 2003 Jeep Wrangler (TJ)
  • 2002 Jeep Wrangler (TJ)
  • 2001 Jeep Wrangler (TJ)
  • 2000 Jeep Wrangler (TJ)
  • 1999 Jeep Wrangler (TJ)
  • 1998 Jeep Wrangler (TJ)
  • 1997 Jeep Wrangler (TJ)
  • Jeep Wrangler Unlimited (LJ)

  • 2006 Jeep Wrangler Unlimited (LJ)
  • 2005 Jeep Wrangler Unlimited (LJ)
  • 2004 Jeep Wrangler Unlimited (LJ)
  • Jeep Wrangler (YJ)

  • 1995 Jeep Wrangler (YJ)
  • 1994 Jeep Wrangler (YJ)
  • 1993 Jeep Wrangler (YJ)
  • 1992 Jeep Wrangler (YJ)
  • 1991 Jeep Wrangler (YJ)
  • 1990 Jeep Wrangler (YJ)
  • 1989 Jeep Wrangler (YJ)
  • 1988 Jeep Wrangler (YJ)
  • 1987 Jeep Wrangler (YJ)
Share Your Thoughts
Review Summary
5
Based on 2 reviews
Shared Media
Questions

Customer Submitted Photos

Share Another Photo

ARB Rear Modular Bumper in Black Reviews