Quadratec JLJT-CBFMK Stainless Steel Fender Mount CB Antenna Kit for 18-25 Jeep Wrangler JL & Gladiator JT
Quadratec Part #:
96080-0057
Description
Finding a spot to mount the CB antenna on your Jeep Wrangler JL or Gladiator JT is not a problem with the Quadratec Stainless Steel Fender Mount CB Antenna Kit. Conveniently mounted on the opposite side of the hood from the factory radio antenna for short easy access into the cab. The included 3 ft Super Flex Antenna is custom wound by Firestik specifically for Quadratec and pre-tuned to exactly match the fender mounted location. The antenna is super flexible so it will be harder to break on the trail.
Popular Similar Items
Details
Ease of Installation: Cable and mount included to install this kit, reach into the cab of the Jeep and connect to most CB radios(sold separately).
Antenna Included: Pre-tuned by Firestik to avoid any dialing-in or tuning needed for a sold signal.
Off-Road Ready: With a location visible from the drivers seat and a Super Flex design, the antenna can handle some abuse out on the trail.
- Features: Stainless Steel
- Shipping Weight: 2lb
- Shipping Dimensions: 48in x 4in x 4in (L x W x H)
Jeep Gladiator (JT)
- 2025 Jeep Gladiator (JT)
- 2024 Jeep Gladiator (JT)
- 2023 Jeep Gladiator (JT)
- 2022 Jeep Gladiator (JT)
- 2021 Jeep Gladiator (JT)
- 2020 Jeep Gladiator (JT)
Jeep Wrangler 2-Door (JL)
- 2025 Jeep Wrangler 2-Door (JL)
- 2024 Jeep Wrangler 2-Door (JL)
- 2023 Jeep Wrangler 2-Door (JL)
- 2022 Jeep Wrangler 2-Door (JL)
- 2021 Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2025 Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Quadratec Stainless Steel Fender Mount CB Antenna Kit Reviews
Michael F.
11/12/2022
Fits good, looks good. My awesome local Jeep shop foreman installed this for me and running the cable apparently was tricky but he got her done!
Thomas W.
4/26/2022
Good product. Had it installed for over a year now. No signs of rust or any corrosion.
James C.
8/31/2021
Received quick, installed to my jeep gladiator without any problems.
Questions
Allan H.
Is this mount strong enough to handle a dual band 2m and 70cm Antenna? The antenna on a mag mount requires an xtra large mag to hold it
No, it will not. Thanks for your inquiry.
Fred R Y.
How do you get the coax from the fender mount into the Jeep’s interior? I have just bought a 2021 Wrangler Rubicon. I have already purchased this antenna and suggested cb radio from Quadratec. Thanks for any assistance that you can provide. Best regards, Fred R. Young
Typically, this is done through the firewall. There are plastic and rubber plugs in the firewall of nearly every vehicle. In some cases, there are unused ones that you can utilize and in other cases, there are some that are already being used but have room for additional use. There are also grommets in the floor that you can use. This may be easier than through the firewall, but it depends on what you are comfortable with. We do have a video of an Alpine upgrade that has our Video Host, Rob, going over how to do this. Here's a link that starts the video around 7:10 into it. He removes the passenger side seat for easier access. Hope this helps! https://youtu.be/vBwOmCsmqwE?t=430
