Quadratec Aluminum Brute Strength Winch Bumper Full Width for 07-18 Jeep Wrangler JK
Lightweight HD Aluminum Design: This killer bumper offers a lightweight heavy duty solution to protect the front end of your Jeep. The full width version weighs in at 71 pounds while the stubby version weighs in at a mere 64 pounds. You can even shave off another 8 pounds if you choose not to install the included Over Rider Hoop. A design that offers a significant weight savings over comparable all steel bumpers. Lighter weight means less change in gas mileage and without the heavy weight of a steel bumper you won't have to worry about the front end dipping down while braking.
Off-Road Winch Ready: The premium winch plate is made from a 5mm thick steel plate with a standard 10" x 4.5" bolt pattern accepting most winches up to 12,000 lbs. This winch plate will allow you to add much needed recovery to the front of your Jeep Wrangler JK. Winch sold separately.
Stout Recovery & Jacking Points: The welded steel D-Ring mounts are made from 3/4" thick steel and have integrated tow strap hooks on top. The integrated holes accept 3/4" D-Rings (sold separate) using a 7/8" pin size giving your Jeep a bold aggressive look with multiple recovery points for all your trail riding adventures. The face of the bumper offers two stout Hi-Lift jack points for safe and simple jacking. These holes also help prevent the jack from sliding off for a safer user friendly solution. For superior strength the Hi-Lift jack will lift up on the steel plate winch mount behind the aluminum bumper fascia.
Versatile Grille Guard: The removable aluminum over rider hoop has sleek dimpled speed holes and is made from durable 4mm thick material. Measuring 40” wide at the base and features a series of holes and slots for auxiliary light mounting.These holes and slots offer limitless auxiliary light mounting options. The top side offers slotted 8mm holes that will accommodate light bars with mounting dimensions of 17-3/4" up to 23" wide, while the additional 2 - 10mm holes are 12-5/8" apart. This variety of mounting options gives you the ability to mount lights that look cool, suit your specific needs and allow you to give your bumper that custom look.
Simple No Drill Installation: This bumper is a direct bolt on installation that does not require any drilling or modification. This easy installation is for the do it yourself installer that can be done with basic hand tools.
Please Note: Not compatible with Quadratec Aluminum Modular Front Sway Bar Skid Plate without modification.
Strength where you need it most with the benefit of a lightweight bumper. The Quadratec Aluminum Brute Strength Winch Ready Front Bumper offers the best of both worlds for your Jeep Wrangler JK. Ultimate protection for the front of your Jeep while the aluminum material keeps the weight to a minimum for better fuel economy.
This premium bumper has a fully welded one piece outer construction using 6mm thick lightweight aluminum plate. The aggressively styled Competition Bumper bolts directly to the vehicle’s existing mounting points and there’s no drilling or modifications required. The separate 5mm thick steel winch plate provides a superior substructure and will accommodate most winches up to 12,000 lb capacity.
Our Aluminum Brute Strength Winch Bumpers are finished with an attractive and durable light textured black powder coating. Bumpers feature fog light provisions to retain the factory fog lights and can be upgraded to our high performance plug-n-play LED versions.
Aggressive Stubby Bumper (47" wide): The Brute Strength Stubby design provides additional tire clearance when needed for those aggressive off-road adventures. Allowing for better approach angles over larger boulders. Offroad ready and overland capable.
Protective Full Width Bumper (69" wide): The Brute Strength Full Width design offers a seamless look with complete front end protection. Helping to protect your Jeep from other vehicles and wild animals. Quadratec offers front end protection you can count on.
- Features: D-Ring Shackle Brackets, Grille Guard, Integrated Fog Light Mounts, Integrated Winch Mount, LED Light Mounts
- Color: Black
- Style: Full Width Bumper
- Material: Aluminum
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
Quadratec Aluminum Brute Strength Winch Bumper Options
| Part Number | Catalog # | Bumper Width: | Price | ||||||
|---|---|---|---|---|---|---|---|---|---|
| 12057 0263 | 12057-0263 | Full Width Bumper | $1,199.99 |
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Quadratec Aluminum Brute Strength Winch Bumper Reviews
Installed on 2010 JK-U. Love the lighter weight and the look. It seems very well made. Also like that it’s hilift jack compatible in spite of being aluminum. Waiting on Christmas to add the winch. Well packaged. The directions could be better. They seemed to repeat one of the steps twice and left out a step as a result. Once I figured that out it went reasonably well. Took me about 4 hours. Fortunately I have a neighbor well stocked with tools. I would give it 4 1/2 stars if possible, The only drawback was the confusion with the directions. Obviously I can’t yet speak to its durability over time, but as I said earlier, I’m impressed with its strength to weight ratio..
The stylings great however the fairly Nuts are not aligned properly I’ve had the bumper for about a year and all the attaching hardware has corroded
So, this is the real first time I had a big issue with a Quadratec product. The insturctions were off were it says under fig.15 install M10 x 20 bolts. It really means install 12 mm hex bolts as it states at the end of page 7 to tighten them later on. But the big part that got me was where I secure the bumper to the winch plate at the fairlead mounting holes. I ended up stripping two of the M10 allen head bolts there as the nuts where not straight at the holes on the winch plate. I found this out while trying to clean up the nuts with a tap. It may also be that the holes are not in aligment with the tow hook holes. As I couldn't get then mounted with the bolts paritialy in place for the fairleads mount. Also some of the nuts for the tow hooks where a bit rough as I had to use the tap to clean a few of them up too. I'm figuring to knock out the nuts for the fairlead and JB weld some on that are straight. Good quality checks on this.
Questions
