Lightweight HD Aluminum Design: This premium rear bumper offers a lightweight heavy duty solution to protect the rear end of your Jeep. Weighing in at mere 50 pounds and built for strength. The lighter weight compared to most aftermarket steel bumpers will keep your fuel mileage in check while the 6mm thick aluminum plate provides the necessary strength. While the steel mounting brackets provide a superior substructure to tie the bumper into the frame. This bumper offers a aggressive style with performance you can count on.
Recovery Ready: The supplied d-ring mounts are made from 3/4" thick steel and have integrated tow strap hooks on top. The integrated holes accept 3/4" D-Rings using a 7/8" pin size giving your Jeep a bold aggressive look with multiple recovery points for all your trail riding adventures. The face of the bumper offers two stout Hi-Lift jack points for safe and simple jacking. These holes also help prevent the jack from sliding off for a safer user friendly solution. For superior strength the Hi-Lift jack will lift up on the steel plate mounted behind the aluminum bumper fascia. D-Rings are sold separately.
Large Spare Tire Opening w/ Non-Slip Step: This large opening will allow for use with larger spare tires. Measuring 25" at the top and descending 4" to a width of 18.5" at the bottom. We also incorporated a dimpled landing pad 18" x 5" to be used as a step allowing you to load up a roof rack with ease once the spare tire is hinged open. Giving you ample space for both feet with grip.
Hitch Compatible: Notched in the bottom center for a perfect fit with the factory hitch. We also include a spacer kit to lower down the existing hitch plug for seamless operation and easy access. Allowing you to maintain your factory tow rating.
Included License Plate Mount: The included all aluminum license plate mount installs on the driver side to existing holes on the bumper. The bolt on design also allows you the ability to use other license plate mounting options if preferred. Please note that the license plate light is sold separately.
Simple No Drill Installation: This bumper is a direct bolt on installation that does not require any drilling or modification. This easy installation is for the do it yourself installer that can be done with basic hand tools.
Compliment your awesome Quadratec Aluminum Font bumper with the Quadratec Aluminum Brute Strength Rear Bumper. Providing ultimate full width protection for the rear of your Jeep Wrangler JL with style. This premium bumper has a fully welded one piece outer construction using 6mm thick lightweight aluminum plate. This aggressively styled bumper bolts directly to the vehicle’s existing mounting points without any modification or drilling.
Quadratec's aluminum design offers a significant weight savings over comparable all steel bumpers. Keeping the weight down on your Wrangler was the reason why Jeep went with aluminum parts for the body. Lighter weight means less change in gas mileage and without the heavy weight of a steel bumper you won't have to worry about the rear end dipping down over time.
Our Aluminum Brute Strength Rear Bumper is finished with an attractive and durable light textured black powder coating. The full width design measures 73" wide and features tapered ends for additional ground clearance. While the welded steel recovery plates feature tow hooks and D-Ring mounts for use with 3/4” D-Rings with 7/8” pins. This ultimate bumper offers a quality you expect with a passion for the Jeep lifestyle allowing you to Overland with confidence.
- Features: D-Ring Shackle Brackets, License Plate Mount
- Color: Black
- Style: Rear Bumper
- Material: Aluminum
- Shipping Weight: 65lb
- Shipping Dimensions: 77in x 19in x 18in (L x W x H)
Jeep Wrangler 2-Door (JL)
- 2025 Jeep Wrangler 2-Door (JL)
- 2024 Jeep Wrangler 2-Door (JL)
- 2023 Jeep Wrangler 2-Door (JL)
- 2022 Jeep Wrangler 2-Door (JL)
- 2021 Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2025 Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Quadratec Brute Strength Aluminum Rear Bumper Reviews
I was looking for a full width bumper that lined up well with the Rubicon Highline fenders. The Quadratec Brute Strength Aluminum rear bumper fit the bill! I read the negative reviews prior to ordering, but figured with all the 5 star reviews that these were just outliers; I was right! The bumper is great and installed easily. You do need to align the bumper side to side, front to back, and up and down to get it perfect, and they do allow for adjusting. You may need to tighten the lower bolts before the side bolts or vice versa, etc. to get it to sit right, and it will if you have some common sense and a little patience. The thin brackets that hold the factory plastic bumper are replaced by heavy steel brackets, so don't fret, this bumper is bolted on well. Quadratec does need to check the weld splatter on the "flag" nuts as I did have to run the bolts in and out prior to install to ensure I wouldn't cross thread them. Also, if you're getting a free something with purchase like a light bar in my case, you'll probably have to wait a month or so before receiving it. Quadratec won't ship it until you're out of the return window as they've been getting returns without getting the free gift back. If you want a full coverage aluminum bumper that is pre-finished to match well with your unpainted Jeep plastics, then this is a great option.
I’m so surprised how easy the installation was! This aluminum bumper is very light weight compared to the OEM steel bumper. I’m loving the new look with the new bumper!
Light higher up than stock