- Replaces OE : 68003655AA, 68003655AB, 68003655AC, 68003655AD
- Construction : Rubber, Foam with Adhesive
- Application : Original Replacement
- Locate and See Related Parts :
- Hardware Type: Factory OEM Hardware
- Shipping Weight: 6lb
Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Mopar Door Surround Foam Tape Kit Reviews
This and door weatherstripping ($$ ouch!) fixed my 2011 JKU leaky doors and soft top. Couldn't figure out where the foam went because there wasn't much left of the original pieces but finally found the posted picture as part of a PDF on WranglerForum.com. The entire 144-page official Mopar guide to repairing water leaks is a "sticky" (2nd one) under the "JK Tech" forum. Good luck!
Please note: This is a MOPAR ISSUE, not a Quadratec issue! Although Mopar says this matches the fitment for a 2010 Jeep Unlimited Sport, this does not contain ALL the seals for the door surrounds. The front surround A-pillar foam and B-pillar foam pieces are incomplete. I had to cut pieces from the small squares of foam that came in the kit and use parts of the old seals. The rear surround foam above the B-pillar is also not included, and unfortunately for me, this piece is extremely worn and seems to be the source of my leak. After trying to rig up my own solutions, I was so frustrated with the leak that I spent $170 for what looks like $10 worth of foam and still don't have a solution to my leaky top.