Skip to main content
Home » Jeep Bumpers » Rear Bumpers & Tire Carriers » Rear Bumpers » HyLine OffRoad Summit Rear Bumper

HyLine OffRoad Summit Rear Bumper for 18-25 Jeep Wrangler JL

Starting at
$688.74
Description
Hyline Offroad Rear Bumper with Tire Carrier for Jeep Wrangler JL models is designed and built with superior durability and longevity in mind. This bumper with tire carrier includes all the bells and whistles to complement the styling of the JL. You don’t have to worry about having to purchase any additional license plate relocation brackets, lighting or park assist sensor mounts. It’s all included for a one-stop purchase with a simple and clean installation. The Summit Swingout Tire Carrier is designed to seamlessly install into the bumper and operate with your factory tailgate. Simply pull the factory tailgate latch and as you swing open the tailgate the tire carrier will follow. All the weight of the tire is on the solid steel high strength pivot pin. The zinc-plated pin is sealed inside cast bronze bushings with o-rings to keep the grease in and the moisture out. The carrier will accommodate up to a 40" tire. If you have the factory hitch receiver and trailer plug terminals you don’t have to remove them or modify them in any way as the Hyline bumper is designed to install cleanly overtop of them. If you decide to buy the rear bumper or swingout tire carrier as separate pieces, you can match them up in the future, they are both already prepped to fit together. The Summit rear bumper is designed to have the factory park assist sensors re-mounted into the bumper with no modification to the sensors or wiring harness. Hyline provides the grommets and specially designed stainless-steel mounting clip brackets. You do not have to relocate the factory license plate to the spare tire or to the top of the bumper. It remains in the factory position and is fully protected from any off-road obstacles. Also included with the bumper is a bright white LED license plate light that is hidden behind a flange for an exceptionally clean look. The bumper and tire carrier are both E-Coated which acts as a complete sealing primer. A topcoat is applied using an automotive-grade powder coat. The powder topcoat is a light texture black semi-gloss that closely matches the OEM black plastic fender flare texture. Hyline Offroad has paid great attention to detail and ensures your purchase will last for years to come.

Made in the USA!

Note: Choose Rear Bumper, Tire Carrier, or Rear Bumper with Tire Carrier Combo Kit.

Details

Summit Rear Bumper Features:

Construction: 3/16” steel construction with 1/4” plate mounting brackets and stiffeners – all USA grade material.

Recovery Mounts: Includes 5/8” plate shackle mounts (hole size is for 3/4” shackles).

Completely Bolt-On Design: - No cutting or drilling required for installation.

License Plate Mount: Depressed center area allows for additional tire clearance. recessed license plate pocket with threaded nuts and supplied stainless screws. Includes white LED license plate light with solder joint butt connectors with heat shrink.

Park Assist Sensors: Bumper includes park assist sensor grommets and clip brackets. If park assist sensors are not re-installed the package includes flush mounted hole plugs.

    Tire Carrier Features:

  • Mixture of 2”x4”x1/8” steel tube and 3/16” steel brackets.
  • Simple one handed open/close operation.
  • ¼” Thick steel frame tie in bracket for added strength.
  • Completely bolt on design - no cutting or drilling
  • Solid zinc plated high strength steel pivot pin.
  • Cast bronze bushings and o-rings for sealed pivot pin.
  • Re-Uses factory wheel stud plate.
  • Vertically adjustable tire mount 4” up or down.
  • Horizontal adjustable tire mount, slotted 3” in or out CB antenna mounting tab with hole.
  • Red LED third brake light supplied with male/female spade connectors with heat shrink.
  • Back-up camera housing and shroud.
  • All hardware included is 316 Stainless Steel and/or super corrosion resistant coated high strength steel.

Installation Notes
Installation Difficulty:
Skill Level 2 IconLevel 2Intermediate
Installation Time: 2-3 hours
Swingout Tire Carrier
Parts Included
  • Bumper/Tire Carrier (separate or kit)
  • LED Third Brake Light ( with Tire Carrier purchase)
  • Hole Plugs, Park Assist Sensor Grommets (with Bumper purchase)
  • LED License Plate Light (with Bumper purchase)
  • All Hardware & Instructions
Warranty
1-Year limited Warranty
  • Color: Black
  • Style: Rear Bumper or Rear Tire Carrier or Rear Bumper with Tire Carrier
  • Material: Steel
  • Features: Tire Carrier
*Please make a selection above to view weight, dimensions, specs of a specific product
  • Jeep Wrangler 2-Door (JL)

  • 2025 Jeep Wrangler 2-Door (JL)
  • 2024 Jeep Wrangler 2-Door (JL)
  • 2023 Jeep Wrangler 2-Door (JL)
  • 2022 Jeep Wrangler 2-Door (JL)
  • 2021 Jeep Wrangler 2-Door (JL)
  • 2020 Jeep Wrangler 2-Door (JL)
  • 2019 Jeep Wrangler 2-Door (JL)
  • 2018 Jeep Wrangler 2-Door (JL)
  • Jeep Wrangler Unlimited 4-Door (JL)

  • 2025 Jeep Wrangler Unlimited 4-Door (JL)
  • 2024 Jeep Wrangler Unlimited 4-Door (JL)
  • 2023 Jeep Wrangler Unlimited 4-Door (JL)
  • 2022 Jeep Wrangler Unlimited 4-Door (JL)
  • 2021 Jeep Wrangler Unlimited 4-Door (JL)
  • 2020 Jeep Wrangler Unlimited 4-Door (JL)
  • 2019 Jeep Wrangler Unlimited 4-Door (JL)
  • 2018 Jeep Wrangler Unlimited 4-Door (JL)

HyLine OffRoad Summit Rear Bumper Options

Part NumberCatalog #Rear Bumper, Tire Carrier, or Bumper with Tire Carrier Combo KitPrice
600.200.10012005-8925Rear Bumper$688.74
600.200.12012005-8935Swingout Tire Carrier$712.49
12005-8926Rear Bumper/Swingout Tire Carrier Combo Kit$1,401.23
Share Your Thoughts
Review Summary
4.5
Based on 4 reviews
Shared Media
Questions

Customer Submitted Photos

Share Another Photo

HyLine OffRoad Summit Rear Bumper Reviews