Quadratec Part #:
56020-0010
Crown Automotive Part #:
52059912AC
Description
Fits either right or left side.
Popular Similar Items
Details
- Replaces OE : 52059912AA ,52059912AB, 52059912AC
- Construction : Rubber
- Measures : 3/4" Thick
- Locate and See Related Parts :
- Features: Rubber
- Color: Black
- Shipping Weight: 1lb
- Shipping Dimensions: 5in x 5in x 3in (L x W x H)
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Crown Automotive Front Upper Coil Spring Isolator Reviews
Powell D.
8/14/2022
Doing the spring lift and found that someone had already done a 2.5" bushing lift and they were worn out and cracking.
Eric B.
2/6/2021
Same as the OEM, just smear some grease on them when installing and they seat much better. If changing out springs, drop the extra cash for a new set of these as it will save headaches from happening later on--especially if the Jeep is more than a few years old.
Ron J.
12/6/2021
Spring upgrade time. And OME spring isolator's are needed on my 2012
Questions
Shannon S.
are these sold in pairs or each?
These are sold individually. Thanks for your inquiry.
Grady M.
Hey there. I bought some 3” Terre flex coils from you all. My JK had some 2” spacers on it when I got it and I’m swapping them out for the springs. The instructions with the springs clearly note to “use the rear factory coil isolator” when installing the rear springs but it says nothing about an isolator on the fronts. I’m ordering some rear isolators from you all as mine didn’t have any once the 2” spacers were removed on the front or rear. Do I need some for the front as well? The instructions didn’t note anything about front isolators but hoping you all can confirm yes or no.
Yes, you should use isolators on both front and rear springs. They help to keep the spring properly centered and seated.
Bill T.
what material is this made of?
This is made of standard rubber.