Alpine PSS-22WRA Waterproof Full Sound System Upgrade for 11-18 Jeep Wrangler Unlimited JK
Completely revolutionize the audio experience in your Jeep with the Alpine PSS-22WRA Waterproof Full Sound System Upgrade. This 600-watt kit is designed specifically for four door Jeep JK Wranglers, and features four 6.5” speakers, four 1” tweeters, a 10” sub-woofer, and two amplifiers. Unlike other replacement speakers and sub woofers on the market, Alpine specifically tuned this entire system for Jeep Wrangler. All wiring, adapters, and connectors are included to install this plug-n-play kit into your Jeep. Best of all, you do not need to worry about damaging the PSS-22WRA when your top is down, because every component has a minimum of IP55 waterproof rating.
Installation Note: The Alpine 10" Water Resistant Subwoofer is designed for use with factory carpet. If your Jeep does not have carpets, additional padding may be required.
Designed for use on Jeeps with Automatic Transmission
Not Compatible with Factory Premium Sound System
Not Compatible with 2-Door Wranglers
Designed for Jeeps: Alpine engineered PSS-22WRA Waterproof Full Sound System Upgrade to be compatible with all late model four-door JK Wranglers with automatic transmissions. The included SPV-65X-WRA speakers are Jeep specific and include adapter that fit will all JK year ranges.
Complete Package: The PSS-22WRA Waterproof Full Sound System Upgrade includes everything you need to take your Jeep’s audio to the next level. With the high-performance replacement speakers, sub-woofer, and amplifiers, you will be able to get the most from your factory or aftermarket stereo.
SPV-65X-WRA Replacement Speaker Specs:
Woofer Diameter: 6-1/2”
Woofer Cutout Diameter: 5-7/16”
Woofer Cutout Depth: 2-5/8”
Tweeter Diameter: 1”
Peak Wattage: 225 watts
Root Mean Square (RMS) Wattage: 75 watts
Frequency Response: 65Hz – 22kHz
Impedance: 4 ohms
Sensitivity: 88 dB SPL (1 W @ 1m)
Waterproof Rating: IP55
SBV-10-WRA Sub-Woofer Specs:
Speaker Diameter: 10”
Peak Wattage: 1050 watts
Root Mean Square (RMS) Wattage: 350 watts
Frequency Response: 45Hz – 200Hz
Impedance: 2 ohms
Waterproof Rating: IP66
KTA-30FW Four Channel Tough Pack Amplifier Specs:
Class: D
Dynamic Pulse Power (DPP) Equipped: Yes
Power: 150W DPP x 4 @ 2Ω/4Ω, 14.4V, ≤1% THD+N
Root Mean Squared: 75W RMS x 4 @ 2Ω/4Ω, 14.4V, ≤1% THD+N (CTA-2006-B compliant)
Signal to Noise (1W into 4Ω): >85dB
THD (ref. 1W into 4Ω): <0.1%
Frequency Response: 20-20kHz (+/- 1dB)
Waterproof Rating: IP66 rating
Inputs: Speaker/RCA inputs (selectable, High range = 0.5-10V, Low range = 0.2-4V)
Sound Control: Crossovers - Off/HP/LP, Fc = 50-400Hz @ -12dB/Oct. (variable); Input gain settings (variable); 2ch/4ch input (selectable)
Alpine KTA-30MW Mono Tough Pack Amplifier
Class: D
Dynamic Pulse Power (DPP) Equipped: Yes
Power: 600W DPP x 1 @ 2Ω, 14.4V, ≤1% THD+N
Root Mean Squared: 300W RMS x 1 @ 2Ω, 14.4V, ≤1% THD+N (CTA-2006-B compliant)
Signal to Noise (1W into 4Ω): >83dB
THD (ref. 1W into 4Ω): <0.1%
Frequency Response: 20-400kHz (+/- 1dB)
Waterproof Rating: IP66 rating
Inputs: Speaker/RCA inputs (selectable, High range=0.5-10V, Low range=0.2-4V)
Sound Control: LP filter - Off/LP, Fc = 50-400Hz @ -24dB/Oct. (variable); Input gain settings (variable); Bass EQ: 0 to +12dB, Fc = 50Hz (variable)
Chassis: Cast Aluminum
Level 2IntermediateDesigned for use on Jeeps with Automatic Transmission
Not Compatible with Factory Premium Sound System
Not Compatible with 2-Door Wranglers
SPV-65X-WRA Component 2 Way Speaker System:
- 6.5” Speakers (Qty 4)
- 1” Tweeters (Qty 4)
- Speaker Grille (Qty 4)
- Tweeter Adapter Plate (Qty 4)
- Crossover Wiring (Qty 4)
SBV-10-WRA 10" Water Resistant Subwoofer:
- Subwoofer Housing
- Subwoofer Speaker
- Wiring Pigtail
KTA-30FW Four Channel Tough Pack Amplifier:
- Amplifier
- Amp Wiring
KTA-30MW Mono Tough Pack Amplifier:
- Amplifier
- Amp Wiring
- Remote Brass Knob
Dual Amplifier Bracket
- Color: Black
- Size: 6" Woofer, 10"
- Location: Full surround
- Shipping Weight: 48lb
- Shipping Dimensions: 21in x 20in x 20in (L x W x H)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
Not Compatible with 2-Door Wranglers
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Alpine PSS-22WRA Waterproof Full Sound System Upgrade Reviews
Your program says this does not fit my 2016 Jeep Wrangler sport two door JK do you have a version of this for the two-door JK
It plugs into the existing system, and it's designed to work specifically with my JK
Plug and play!! The sound is AMAZING...
I installed it myself, it was definitely intimidating at first.
I had zero experience tuning the amps, so I took my time and with a little experimenting, I believe I nailed it!
After removing all the stock speakers, I ran the wiring harness, loosely installed the speakers and sub, connected everything, and turned the power on. BOOM it worked as it should. The amps hadn't been installed yet so I could tune them while they sat on the floorboard. I tweaked it until I found the best sound.
NO PROBEM!! I double checked everything, then buttoned everything up tight.
I'm very happy with this system
Questions
