Reviews for Quadratec Fog Lamp Anti Flicker Pulse Width Modulator for 10-20 Jeep Wrangler JL & JK
Perfect fit, zero flicker, works with the factory fog light controls. Absolutely worth it to reuse your factory fogs with LEDs.
Worked perfect with my oem led fog lights. I knew they were not plug and play for my application so I spliced on a new female connector to fit the oem light and they worked perfect.
The work beautifully. Took away the strob like flicker I was getting out of the Oem led Fog lights I added to my 14 JKU Polar. However since I neglected to read the description thoroughly , to get these to work! With my OEM Fog lights I had to cut and solder the OEM plug into the anti flicker module and then Soldered the other end of the module to the factory Fog light harness just to ensure a great connection. But like I said, even with the lack of reading on my part, I was still able to get these to work and they function exactly as you would hope
No flicker. Not sure if I needed these but better safe than sorry.
Easy install!
JKURHR 14, It works for me, stopped blinking, I'm using the Myotek (2017 OEM) it was only necessary to remove one of the ends (green-small) and replace it with a (some type "H" harness) to adjust with the headlights Led, I'm happy with them,
These were easy to install and work as advertised. Plenty of room for them in my Smittybilt Carbine bumper. I have them zip-tied in place so they don't move around.
A must have for the fog lights. Work great.
This harness pair works great on my 2016 JK Unlimited with the Quadratec factory location LED fog lights. I was told prior to ordering that these are designed to work solely with their Quadratec brand LED fog lights. The chat rep said they may or may not work with other brands. Just take that into consideration before ordering. I think that may be why the other reviews are negative?
This worked really great when I upgraded my 2016 JKU with incandescent fog lights to 2017 LED fog lights. They flickered like crazy when I hooked them up and this solved the problem. The problem with unit is that it doesn’t come with instructions which would be fine if you had all the right connectors already installed. I don’t think most people do and I sure didn’t. I had to cut the connectors off and figure out which end went towards the jeep in which end went to towards the fog light. The other problem is that JL fog lights are colored backwards. The black lead is positive. On this module, black is negative and so I had to reverse the wires to get it to work. I submitted a photograph with how I wired it to help others. Unfortunately, I can’t attach it to this review.