Reviews for Rugged Ridge 17606.76 Exhaust Spacer Kit for 12-18 Jeep Wrangler JK with 3.6L

works as advertised

I never used them but the kit had everything Incase I needed it!

Worked well as advertised.Use pb blaster on the bolts and let them soak for a day

They work and are less expensive than other similar items. Start hitting the old bolts with PB Blaster or other penetrant a few days beforehand. I still snapped a couple bottom bolts. One hour job could turn into a full day of fighting rust and broken bolts.

Fit perfect and well made

Great product. Not too difficult to install

simple and gets the job done

Buyer beware. Have some extra bolts and washers on hand before you start the install. The kit came with M8x1.25x90mm bolts for the passenger side and M8x1.25x80mm bolts for the driver's side. Both were too long to clamp the joints f nstalled per the instructions. Instead I used the 80 mm bolts and a pair of stacked washers as a spacer on the passenger side and bought two 70 mm bolts and a couple spare washers for the driver's side.

Did not need to use.

Bolts were too long with out enough threads! I had to stack a bunch of washers. All they had to do is provide fully threaded bolts!