Reviews for Crown Automotive RT21023 Heavy Duty Greasable Shackle Kit for 87-95 Jeep Wrangler YJ

Gave me about an inch of lift. Easy install.

Easy to install. Smoother ride now.

Very easy to install, I did it during my lift kit install. I just cut the heads off the factory rear bolts with a Dremel tool and a carbide bit and install the new ones the way they should have been done in the 1st place.

Easy to install good institutions made Jeep handle better

My 94 YJ came with some very tall aftermarket shackles and I didn't much care for them. These are way better. Right away I could tell the ride was much better than before. These are great and I do recommend.

Used these shackles on my YJ's new 4 inch lift and they worked great while giving me a little extra lift at the same time. A big improvement to have greasable shackles.

Perfect, easy install.

everything fit and works what else can you ask for.

I needed 1/2"-3/4" of clearance for my new tires on my YJ (245/75r16) with otherwise stock suspension and in a couple hours I was exactly where I needed to be. Cant ask for much more for the money than this kit. I used locktite on the grease fittings, but otherwise its some plates and some bolts, not a lot to go wrong here. As advertised. I did cut out one of the original rear bolts, the other one cleared. Didn't remove gas tank (1995 small tank if that matters, but I would have cut both of the original bolts long before I would pull the tank for this install)

Thanks Crown and Quadratec for another solid product at a fair price.

I installed these shackles about a year ago, no problems. Pretty easy install job, gave my '93 YJ a really good stance. Just lifted enough to run 31" tires with no rubbing. I'd recommend these, especially for the price! I had a problem with a grease fitting breaking off, but a quick phone call to Quadratec, and they made it right, FAST. You don't wanna go much taller than this with only a shackle lift, and these worked out great.