« Back to product
Shawn B.
Do these come prefinished black? No painting required?
Yes, these are molded in a textured black and intended to be installed as they are shipped. Not to be painted.
Ken K.
Are these a true jet Black? my originals turned gray.
Yes, they are black. Left alone they will fade to gray as well. UV stabilizers tend to leech out over time. Products like Forever Black will condition the plastic as it cleans and make them last longer.
Theodore L.
do you have a installation guide that i can follow that i can print from your website?
No, unfortunately since these are original replacement parts, printed instructions are only located in factory service manuals.
Bill C.
For the mounting hardware on the fender flares, is there a special tool to install the rivet nuts? I have tried to use these before and while tightening the screws into the nut, it simply strips the hole in the fender.
Yes, you will need a Metric nutsert tool such as Performance Tool #W2007
Dennis K.
What is the width of these fender flares
These are base model width, 3-3/4"
Jon P.
Quadratec Part #: 12510.5006 will this be a replacement for 98 wrangler sport?
Yes it will
Anthony W.
Are these meant to be painted to match? I have a 98 Sahara and my flares are green.
For these to be painted they must be sanded and primed first. The only flares that we offer for painting without sanding are the original Mopar Flares found here : https://www.quadratec.com/products/12514_02_07.htm
Margaret F.
Can I order extra mounting hardware?
We do not sell the pieces individually but do offer a kit of just the hardware. Please see 12510.5901
Javier V.
I know these are original replacements but how wide are these ?
These are the same width as the 3.5" wide factory flares.