« Back to product
Gavin B.
Would this locker work with 4.88 gears
Yes. JK Dana 44's do not have a carrier break, so this works with all gear ratios that fit into the Dana 44.
Michael A.
Would this locker cause limp mode on a 12-18 jk with an automatic transmission like the Yukon Grizzly locker does?
I see that you have asked this question before. There are varying answers. While this would work in the rear, the front will not work due to the traction control. A programmer would temporarily resolve the issue but if the front locker actuated at normal speed the computer would think that both front wheels are sliding because they would be rotating at the same rate. This would make the automatic transmission think there was something wrong and go into limp mode. We recommend selectable lockers for automatic transmission.
Kyle G.
Can this be used in a front application?
This is not for Rubicon D44 front applications.
Joseph C.
Does this unit need to be drilled out for 1/2" bolts?
This unit is set up for 1/2" bolts
Bladimir A.
is this locker compatible with automatic transmissions?
Yes this locker would do fine on an automatic application