Skip to main content
Home » Jeep Winches, Recovery & Safety Gear » Winches » Quadratec RES-Q Teton Series Winch
« Back to product
I have an 03 Rubicon with a Warn front bumper, with warm winch mounted. Will I need a different mounting bracket for this winch? Mine winch is working questionably.
Our winch should have no issue or fit concerns using the same winch mounting plate you have used for your Warn model. Thanks for your inquiry.
What additional items woulld be needed to mount to a stock 2014 bumper?
The following Warn winch mount will allow the fit on a stock front bumper. Warn winch mount for 12-18 JK with stock front bumper. Thanks for your inquiry.
Will the vacuum pump need to need to be relocated with this winch and the qrc front bumper, on a 2017 JKU sport?
No, it does not. Thanks for your inquiry.
I have a 2018 4 Door JKU Freedom Edition (Oscar Mike). The stock front bumper on this Oscar Mike can fit a winch. Is there a certain winch plate I need for the installation?
The model by rugged ridge here is applicable for metal JK bumper options.Winch plate for Mopar Steel JK Bumper by Rugged Ridge
Do I need a winch plate in order to install this winch on a Rugged Ridge HD Stubby Bumper for a 21 Gladiator Sport?
No, that bumper is winch ready and will take our winch without an extra plate needed. Thanks for your inquiry.
What winch plate kit would i use for a 2018 Jeep Wrangler JK Rubicon Recon with Hard Rock bumper? Thank you!
This is a plate for JK with metal special edition bumpers. https://www.quadratec.com/products/12049_1110_07.htm Thanks for your inquiry.
I have a Mopar off-road steel front bumper with a winch provision for my 2008 Jeep JK. What mounting plate will I need for this winch? Thanks!
This following link for part number 12112 0135 is exact fit for Jeep 07-18 that are equipped with steel bumper group option or special edition bumpers from another trim package. https://www.quadratec.com/p/mopar/winch-mounting-kit-jeep-wrangler-jk-call-duty-moab-back-country-winter-and-premium Thanks for your inquiry.
What is the max current draw on the 10k Q-performance stealth winch?
Current Draw: 320 amps
what mounting plate do I need for a 1980 CJ5
That varies depending on your front bumper. If you have a factory style front bumper, you need part # 22113.0000. If you have a front tube bumper with a cutout for a winch, then you need part # 12052.7401.
I have an '04 TJ with a stock bumper. What extra parts would I need to put this on it?
To mount the winch on the stock bumper of your Jeep Wrangler TJ it will require a winch mount. https://www.quadratec.com/products/92122_2900_07.htm