Reviews for Quadratec Daytime Running Light DRL Adapter Wiring Harness for 18-22 Jeep Wrangler JL & Gladiator JT

Easy wiring

Make wiring items easier and cleaner install

Makes it simple

Worth every penny! The directions need to be re-written because they are awful! The plug is fairly easy to find. Goto the drivers side near the brake booster. About 8" towards the front fender is the plug, run your hand along the edge to locate it. I used a trim removal tool to pop out the plug that holds the wiring plug. Plugged in the harness and wired it up. Took less than 10 minutes and worked perfectly.

Quick and easy install. I pulled the fender liner but I could have just reached in from the engine bay.

I bought a couple of these. Worked great with no problems.

Quick

Utilized this harness to install the Overtread Front Fender Air Vent LED lights. Worked flawlessly! Highly recommend.

Very simple plug and play installation . Made wiring in additional running lights very easy without having to cut into factory harness.

This is an outstanding product. I'm so glad I didn't have to splice into my wires. I used the DRL leads to wire up the Halo rings on my headlights. I used the running lamp lead to wire into my marker lamps in my front grille. Basically I just reached inside the engine compartment on the drivers side, pulled the xmas tree connector that holds the wire out of the body, then plugged this in. Passenger side was a little harder, had to work it from underneath. The quick connectors were super convenient and they have inline fuses which is nice. I ordered one for each side so the DRL's on each headlight would go off when the turn signal on that side goes on. My only complaint is that the instructions were wrong. The instructions say the DRL's are on the red wire and running lamps on yellow. It's actually the reverse of that. Aside from the mistake in the instructions, this is an awesome item.