LoD Offroad Destroyer Rear Bumper and Bed Sliders for Jeep Gladiator JT

Hey Rob here for Quadratec.com. Today we're checking out the LoD Offroad Destroyer rear bumper for the 2020 and newer Jeep Gladiator JT. This bumper combines a variety of different features and the versatility of modular components allowing you to custom tailor the bumper to fit your exact needs. It Features a heavy duty all steel construction with a lightly textured black powder coat finish and has been designed to be a direct bolt-on install utilizing all of the factory rear bumper mounting locations for an easy no drill install. It is compatible with the factory trailer hitch and does give you provisions for remounting your factory 4-way and 7-way trailer wiring receptacle just to the side of the built-in license plate mount. We also have two additional holes here for installing the optional led license plate light kit. The bumper has also been designed to be compatible with the factory backup sensors. If your Jeep did not come with the backup sensors you do get four of these block off plugs to fill in those holes. Here in the center of the bumper you'll see we get a nice wide step it's going to make it easy to get up and get access to items you may have in the bed of your Gladiator and we've got some anti-slip grip tape on here with a hexagonal design and the LoD Offroad logo the same tape that we've seen used on some of LoD Offroad’s other products. We also have two additional steps one at each corner of the bumper again to make it easy to get up and get access to the bed of your truck. If we move towards the sides of the bumper here's where we're going to see some of those modular components. I've already got a few installed in the bumper here. The bumper will come with two blank block off plates or you can add the optional d-ring recovery point available separately that is compatible with a 3/4 inch d-ring shackle with a 7/8 inch shackle pin to give you a nice heavy duty and solid recovery point. Just outboard of that again the base bumper will include a block off plate or you can optionally install one of the light mount adapter plates. As you can see I do have the 3 inch led cube flush mount adapter plate installed with a set of Quadratec flush mount 3 inch flood lights to help give some additional light when we're backing up. Finally you can add even more protection to the rear of your Gladiator by installing the LoD Offroad Destroyer bed sliders that extend that protection from the rear bumper forward to the rear fender flares. They bolt again in factory mounting locations for an easy no drill install and they provide great additional protection to the rear quarter area here of your bed for when you're sliding over those extremely difficult obstacles. If you guys want to get more information about the LoD Offroad Destroyer rear bumper for the 2020 and newer Jeep Gladiator you can click that info button to head over to quadratec.com. Of course as always if you ever have any comments or questions about the bumper you can always do this for me down in the comment section below or contact us directly at any of the options on the screen and if you haven't already and you like these videos do me a huge favor make sure you click that thumbs up button don't forget to hit that subscribe button as well as the notification icon so you’ll be sure to catch all of our latest videos. Until next time, I’m Rob, I'll see you out on the trail!