Rugged Ridge 18003.10 HD Steering Box Mount for 76-86 Jeep CJ-5, CJ-7 & CJ-8 Scrambler
1 H/D Steering Box Bracket
4 7/16 Lock Nuts
1 5/8 x 2 ½ Bolt
10 Flat Washers
1 5/8 Flat Washer
2 7/16 x 1 Hex Head Bolts
3 .700 Tall Spacers
3 7/16 x 2 Hex Head Bolts
2 .275 Short Spacers
1 Outer Frame Clamp
3 7/16 x 2 ½ Studs
1 7/16 x 2 Stud
- Shipping Weight: 12lb
- Shipping Dimensions: 8in x 6in x 6in (L x W x H)
Jeep CJ-7
- 1986 Jeep CJ-7
- 1985 Jeep CJ-7
- 1984 Jeep CJ-7
- 1983 Jeep CJ-7
- 1982 Jeep CJ-7
- 1981 Jeep CJ-7
- 1980 Jeep CJ-7
- 1979 Jeep CJ-7
- 1978 Jeep CJ-7
- 1977 Jeep CJ-7
- 1976 Jeep CJ-7
Jeep CJ-8
- 1985 Jeep CJ-8
- 1984 Jeep CJ-8
- 1983 Jeep CJ-8
- 1982 Jeep CJ-8
- 1981 Jeep CJ-8
Jeep CJ-5
- 1983 Jeep CJ-5
- 1982 Jeep CJ-5
- 1981 Jeep CJ-5
- 1980 Jeep CJ-5
- 1979 Jeep CJ-5
- 1978 Jeep CJ-5
- 1977 Jeep CJ-5
- 1976 Jeep CJ-5
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Rugged Ridge HD Steering Box Mount Reviews
Super beefy bracket. Installed on my ‘84 CJ7. This was not an easy install, however it did go on eventually. Two tips: Attach bracket to steering box before attempting to bolt to frame. Don’t tighten frame bolts until all bolts have been started to ensure proper fit and prevent cross threading or flattening.
Good product, works as intended
Fairly easy to install and I didn't have to modify my box or frame holes but the center through bolt on the frame clamp was a bear to start and set. The frame flattened the threads on the supplied bolt when I did the mock up so I got a harder bolt and it seated and snugged perfectly.
