Skyjacker JFSBA10 RockLock Sway Bar Disconnect System for 97-06 Jeep Wrangler TJ & Unlimited

Notes:

• Each arm has 3 separate mounting locations for the end links. The location farthest from the front of the vehicle will be the softest setting. After driving, if this setting is too soft, the end link can be moved toward the front to provide a firmer setting.
• If the arms seem to be un-parallel, the outer gear on the hub can be clocked on the inner gear to help align.
• This kit is deigned for the hub to be in the locked (4x4) position while on-road, and un-locked (2x4) position for off-road.
• On vehicles with less lift, the end links can be shortened to allow for proper installation.
• After install is complete, check travel on suspension to ensure clearance on all parts. Make sure the end links are adjusted so that the arms are not in danger of flipping forward at full droop.

Installation Notes

Installation Difficulty:

Level 3Advanced

IMPORTANT NOTES:
• Front bumper will need to be trimmed to allow for clearance of the new hub.

Installation Time: 4-5 hours

Installation
Instructions

Parts Included

Driver Side Sway Bar Arm
Passenger Side Sway Bar Arm
Sway Bar
Hub
Hardware Bag

Warranty

Limited Lifetime Warranty.