Tom Woods 52301.905 Extended Rear CV Driveshaft for 97-06 Jeep Wrangler TJ with Dana 44 Rear Axle
Quadratec Part #:
52301-905
Tom Woods Part #:
52301.905
Description
Extended rear drive shafts for lifted applications. Manufactured with top-quality components and workmanship. Balanced and ready to install. For use only with slip-yoke eliminator kit.
For vehicles with 5-speed or 6-speed and Dana 44.
NOT for Rubicon Edition.
For vehicles with 5-speed or 6-speed and Dana 44.
NOT for Rubicon Edition.
Popular Similar Items
Details
Specifications:
- Length: 15"
- Running Position: 14"-16"
- Requires SYE for fitment
- NOT compatible with the Rubicon Model
- Location: Rear
- Shipping Weight: 17lb
- Shipping Dimensions: 21in x 13in x 7in (L x W x H)
Jeep Wrangler (TJ)
- 2006 Jeep Wrangler (TJ)
- 2005 Jeep Wrangler (TJ)
- 2004 Jeep Wrangler (TJ)
- 2003 Jeep Wrangler (TJ)
- 2002 Jeep Wrangler (TJ)
- 2001 Jeep Wrangler (TJ)
- 2000 Jeep Wrangler (TJ)
- 1999 Jeep Wrangler (TJ)
- 1998 Jeep Wrangler (TJ)
- 1997 Jeep Wrangler (TJ)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Tom Woods Extended Rear CV Driveshaft Reviews
Wade R.
2/18/2023
Great upgrade no vibration when climbing
Ed J.
11/8/2021
Came recommended.
HARRISON E.
7/27/2018
Amazing driveshaft. However, it is too short to work with a teraflex extreme short shaft sye and 4"+ lift
Questions
Edward H.
what is the extended and collapsed length of this drive shaft
This drive shaft will bottom out at 14.25” and extend out to 17” center of u-joint to center of u-joint, safe usable range is 15” to 16” Thanks for your inquiry.
Jason M.
Does this have the X-spline? When speaking to Shawn Woods he told me that anything under 16.5 inch needed to use the S-spline.
That part will use the ( S ) standard spline its natural ride length is 15.5”. Thanks for your inquiry.
Kenneth S.
Will this work on a stock suspension with a SYE installed?
No unfortunately these Tom Woods shafts require a lift ( 2"-6" ) and SYE for proper fitment on the TJ Wrangler