MTS 0051XL Polyethylene 21 Gallon Fuel Tank with Conversion Kit for 78-86 Jeep CJ-5 & CJ-7 with factory 15 Gallon Tank
Quadratec Part #:
51306-14
MTS Part #:
0051XL
Description
High Density Polyethylene fuel tanks are safer, lighter and very reliable. Models available for most CJ and Wrangler vehicles. 21 Gallon tank. This kit will only replace the factory 15 gallon tank, will not replace factory 20 gallon tank. Not compatible with CJ Scrambler or factory 20 gallon skid plate.
Note: Includes spacers to lower the factory 15 gallon style skid plate reducing ground clearance by 5 inches. Skid plate is sold separate.
Popular Similar Items
Details
Not for Jeeps with 20 Gallon Tanks: The MTS Polyethylene 21 Gallon Fuel Tank is meant to replace 15 gallon tanks only and uses the 15 gallon filler & vent hose.
Ohm range: Full 8.6-10.6, Empty 70-80
- Shipping Weight: 23lb
- Shipping Dimensions: 31in x 21in x 18in (L x W x H)
Jeep CJ-5
- 1983 Jeep CJ-5
- 1982 Jeep CJ-5
- 1981 Jeep CJ-5
- 1980 Jeep CJ-5
- 1979 Jeep CJ-5
- 1978 Jeep CJ-5
Jeep CJ-7
- 1986 Jeep CJ-7
- 1985 Jeep CJ-7
- 1984 Jeep CJ-7
- 1983 Jeep CJ-7
- 1982 Jeep CJ-7
- 1981 Jeep CJ-7
- 1980 Jeep CJ-7
- 1979 Jeep CJ-7
- 1978 Jeep CJ-7
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
MTS Polyethylene 21 Gallon Fuel Tank with Conversion Kit Reviews
Thomas F.
12/23/2022
More capacity and the new sending unit installed.
Gerald A.
1/15/2022
Will see
Bob S.
9/16/2021
Easy
Questions
Andy B.
Just installed this fuel tank. Fuel gauge not registering correctly. How many Ohms is it supposed to be??? Have 11 gallons in tank and it registers empty on the gauge.
The correct fuel sending unit must be used. The ratings on the included sending unit should be Ohm range: Full 8.6-10.6, Empty 70-80. Thanks for your inquiry.
Andy B.
What are the actual dimensions of the tank? Not the shipping dimensions..
Per MTS company, Approx. dimensions 23" x 16" x 15". Thanks for your inquiry.
Ross N.
installed this on a 83 CJ-7: do you need to recalibrate the fuel gage?
No need to re-calibrate. The sending unit will be the correct ohms to be used along with factory CJ fuel gauges. Thanks for your inquiry.
