EVO Manufacturing EVO-1036-10.5 10.5-11.9" HD Sway Bar End Links
Quadratec Part #:
12250-0403
EVO Manufacturing Part #:
EVO-1036-10.5
Description
EVO HD SwayBar EndLinks are made of solid hex bar and are adjustable in length. They come with 1/2" studded Teflon lined rod ends, 3/4" hex bar linkage and all necessary hardware. Offered in lengths ranging from 5.5" to 15.9" Use these to beef up a very important component of your suspension system. These also can be used to help alleviate leaning to one side which is a common problem on many vehicles. If the links you need measure to be within the length gap, use the larger size. Sold in set of two complete links.
Proudly Made 100% In USA.
Proudly Made 100% In USA.
Popular Similar Items
Details
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
EVO Manufacturing 10.5-11.9" HD Sway Bar End Links Reviews
Billy C.
6/21/2017
These are heavy duty, well made sway bars, perfect for a Jeep Wrangler JK Rubicon. Please be aware, that you will have to drill out the holes in the sway bar, where these mount at the top, just a little. It is not difficult to do, but the bolts will not fit if you do not drill them out. If you have a non-Rubicon Wrangler, I recommend JKS Quicker Disconnects.
John P.
7/3/2023
I was really happy with these links when I put them on. After two years, the joints have loosened up, and the rattling is really bad. I asked EVO about the "lifetime guaranty" and was told "These joints are a wearable and will need replacing over time", and I can a rebuild kit for $112. I'll buy someone else's links this time.