Proudly Made 100% In USA.
Also see...
HyLine OffRoad Oversized Spare Tire Adaptor Bracket
Tools Needed
Ratchet
16mm Socket
18mm Socket
3/4 Socket
Torque Wrench
1 Standard Rear Bumper
2 Inner Frame Mounting Brackets
4 1/2-13 Grade 8 Hex Bolts
4 1/2" Grade 8 Flat Washers
4 1/2" Grade 8 Lock Washers
- Features: Integrated Receiver
- Color: Black
- Style: Full Width Bumper
- Material: Steel
- Shipping Weight: 102lb
- Shipping Dimensions: 73in x 17in x 10in (L x W x H)
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
HyLine OffRoad Standard Rear Bumper Reviews
Bumper arrived with a little scratching in the powdercoat, but it was where the tire covers it, so no real big deal I guess. The thing is ridiculously heavy duty and it covers the rear from corner to corner and then some, lots of protection. I purchased this one over the others, mostly because it went with the matching front, looked clean/simple, and didn't have that big saggy diaper look that some of the other designs have. Fitment is on point, the hardware is great and it takes very little adjustment to get it aligned and locked down.
Once again, this thing is HEAVY. I spend a lot of time on the ranch checking cattle, etc. and I have zero doubt that this bumper could bounce a cow off should she refuse to budge. I installed it alone, but it takes a bit of finesse. Once the brackets are on the frame rails, she won't move at all and you can bolt her down.
Love this bumper. Only took an hour maybe 1 1/2 hours, to install, no problems Looks great! Went trail running the weekend after I installed and glad it was there.