Skip to main content
Home » Jeep Hitches & Racks » Hitches » VersaHitch

VersaHitch for 13-18 Wrangler JK with OE Steel Rear Bumper

Quadratec Part #: 12015-1003
PDF Logo Install Instructions
Installation
Instructions
4.666665
3 customer reviews
2 questions answered
Description
This patented hitch design features a 2” Class II receiver at the center with two additional 1.5” accessory receiver tubes for superior stability over a single receiver design. The unique VersaHitch design allows you to pull a trailer while VersaHitch accessories are installed! The VersaHitch has a 350-lb tongue weight rating with a 3,500-lb tow rating for Wrangler Unlimited and a 2,000-lb rating for 2 Door Wranglers. The standard 2" receiver features a welded clip for our 4 pin plug-n-play hitch wiring kit (available separately). Thick welded steel construction features an anti corrosion treatment that's powder coated for durability and good looks. Consult your owner's manual for maximum vehicle towing capacity and recommended towing procedures. Bolt-on installation takes only minutes to install with no drilling.

Designed specifically for 10th Anniversary Rubicon, Rubicon X & Rubicon Hard Rock Edition Jeeps. It is not intended for use on any Wrangler with factory plastic bumpers.
Popular Similar Items
Details
Unique Features:
  • 2” Class II Receiver Hitch
  • Patented Dual 1.5” Accessory Receiver Tubes
  • Accessories are Designed and Engineered for The Ultimate in Cargo Stability!
  • 3,500 lb Tow Raiting (4 Door Wrangler)
  • Easy No Drill Installation
  • Plug-N-Play Wiring Harness (Sold Separately)
  • 23-5/8in Total Width
Installation Notes
Installation Difficulty:
Skill Level 2 IconLevel 2Intermediate
Installation Time: 1-2 hours
PDF Logo Install InstructionsInstallation
Instructions
Parts Included
VersaHitch
  • Features: 1.5" Accessory Receiver
  • Size: 2" Receiver Hitch
  • Shipping Weight: 34lb
  • Shipping Dimensions: 28in x 12in x 12in (L x W x H)

  • Jeep Wrangler 2-Door (JK)

  • 2018 Jeep Wrangler 2-Door (JK)
  • 2017 Jeep Wrangler 2-Door (JK)
  • 2016 Jeep Wrangler 2-Door (JK)
  • 2015 Jeep Wrangler 2-Door (JK)
  • 2014 Jeep Wrangler 2-Door (JK)
  • 2013 Jeep Wrangler 2-Door (JK)

  • Jeep Wrangler Unlimited 4-Door (JK)

  • 2018 Jeep Wrangler Unlimited 4-Door (JK)
  • 2017 Jeep Wrangler Unlimited 4-Door (JK)
  • 2016 Jeep Wrangler Unlimited 4-Door (JK)
  • 2015 Jeep Wrangler Unlimited 4-Door (JK)
  • 2014 Jeep Wrangler Unlimited 4-Door (JK)
  • 2013 Jeep Wrangler Unlimited 4-Door (JK)
Share Your Thoughts
Review Summary
4.666665
Based on 3 reviews
Shared Media
0 Photos
Questions
2 Questions

Customer Submitted Photos

Be the first to submit a photo

VersaHitch Reviews

Philip M.
9/14/2018
5

Very easy install. Just four bolts.
Richard A.
1/10/2018
5

fits great, works and looks awesome, will get a ton of uses with it.
Daniel W.
9/17/2018
4

Install was a bit cumbersome but not the hitches fault. The 10th anniversary bumper likes to drop a bit when the 4 bolts are removed. Also, if your jeep didnt have a hitch to start with, the 4 bolts have those thin metal holders that they slide on a ber to hold something in place. If the bolts stop backing out you might need to get a flat blade up there to pinch them or grab ahold with some needle nose pliers. Holes closest to bumper are slightly smaller than the ones on the back this can make margin for error pretty slim getting the threaded holes in the bumper to align again. Over all solid hitch. I just wish they used a normal receiver size for the side mounts. would be nice to use 1.25" items in those holes.

Questions

Could I get the center to center measurements from the right side 1.5" tube to the left side 1.5 " in tube?
19.5" from center to the center point in the two smaller receivers. Thanks for your inquiry.
will this work for a 2019 JL?
No. This is designed for the 13-18 Jeep Wrangler JK with OE Steel Rear Bumper.
Look Who's Talking
Review Summary
4.666665
Based on 3 reviews
Shared Media
0 Photos
Questions
2 Questions