Constructed from 1/4” cold rolled steel
Eco-Guard mounting hardware passes 1,000-hour salt spray corrosion test
Designed specifically for rear Falcon JK / JKU Series 3 Piggyback Shock Absorbers
Three shock mounting heights possible: Level 1: lower shock mount at stock shock mount height; Level 2: lower shock mount 0.8” higher than stock; or Level 3: lower shock mount 1.6” higher than stock
100% bolt-on installation w/ basic hand tools, but can be welded for additional strength
Raw finish for those who want to weld the skid plates (not required)
Requires cutting of stock lower shock mount
Mounting at Level 2 or Level 3 may affect overall rear axle travel, causing the axle to droop further, which may cause the spring to fall out of place
- Features: 1/4 inch, Steel
- Color: Bare Steel
- Shipping Weight: 13lb
- Shipping Dimensions: 12in x 12in x 7in (L x W x H)
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Teraflex HD Rear Shock Skid Plate Kit Reviews
Definitely makes me more comfortable on the trails. Using this with Expensive Falcon shocks is a no brainer. I have done off-roading with these skid plates. They seem to be exactly what you want them for. I wish I had the opportunity to Rock Crawl with them to get a better feeling. I just haven’t had that opportunity yet. My only complaint is that the mud clogs up between the skid plate and the shock. It can clog to the point that the dial is covered. When cleaning the area, you will need to power wash the mud off the skid. I kind of expected it though. Definitely a good investment to protect your rear Falcon Shocks.
Work well, should be included as a required item by terraflex when ordering the falcon 3+ shocks. The design of the shocks requires these. You will break something with the stock mounts unless you only use it as a mall crawler.