Synergy Manufacturing Steering Correction Kit for 18-22 Jeep Wrangler JL & 20-22 Gladiator JT

Lifting your Jeep Wrangler JL or Gladiator JT can throw a lot of the factory steering components out of their best alignment. Adding this Steering Correction Kit from Synergy is a sure-fire way to help reduce or completely eliminate bump steer or wandering in your road lane. This is achieved by bringing your Track Bar and Drag Link angles back closer to factory spec. The CNC formed 1.5" x .250 wall DOM tubing Drag Link is stout and ready to handle both on and off-road drives. Synergy's advanced Metal on Metal Tie Rod End combined with a Single Plane setup on the pitman arm side fully wipes out Drag Link flop. The Track Bar Relocation Bracket is laser cut, CNC formed from 3/16" and 1/4" steel for the ultimate in endurance. Synergy's Double Adjuster Sleeve allows you to adjust the Drag Link length without the need to remove it from your Jeep. Covered in a durable, abrasion-resistant powder coat for long life and extreme corrosion resistance. Bolt-on installation requires no drilling! Kit includes Front Track Bar Relocation Bracket & a Heavy Duty Drag Link. Made in the USA!

Please Note: Requires drag link to be run in a High Steer (flipped above knuckle) configuration. Minimum of 3" bump stop spacing & 4.75" wheel backspacing is required. Synergy Front Adjustable Track Bar part # 8875-01 is recommended for lift heights 3" and higher.