Synergy Manufacturing 8863-20 Front Lift Coil Springs for 18-24 Jeep Wrangler JL 2-Door with 3in Lift or Unlimited JL 4-Door & Gladiator JT with 2in Lift
Lift Height: All listed measurements are based on a fully loaded Rubicon model. Other Wrangler models will experience increased lift.
Multi-Rate: By using a multi-rate design, Synergy coil springs provide increased ride quality and articulation.
Heavy-Duty Construction: With a black powder coat finish, Synergy coil springs are highly abrasion and corrosion resistant.
Part Number 8863-10 Specs:
4-Door Wrangler JL & Gladiator JT Lift Height: 1in
2-Door Wrangler JL Lift Height: 2in
Initial Spring Rate: 95lb/in
Ride Spring Rate: 120lb/in
Collapsed Length: 7.2in
Extended Length: 20.75-21.25in
Minimum Bump Stop Spacing: 2in
Part Number 8863-20 Specs:
4-Door Wrangler JL & Gladiator JT Lift Height: 2in
2-Door Wrangler JL Lift Height: 3in
Initial Spring Rate: 110lb/in
Ride Spring Rate: 120lb/in
Collapsed Length: 6.8in
Extended Length: 20.75-21.25in
Minimum Bump Stop Spacing: 2in
Part Number 8863-30 Specs:
4-Door Wrangler JL & Gladiator JT Lift Height: 3in
2-Door Wrangler JL Lift Height: 4in
Initial Spring Rate: 110lb/in
Ride Spring Rate: 120lb/in
Collapsed Length: 6.8in
Extended Length: 21.75-22.25in
Minimum Bump Stop Spacing: 2in
- Lift Height Range: 0 - 2.5 inch
- Included Parts: Coil Spacer, Coil Springs
Jeep Gladiator (JT)
- 2024 Jeep Gladiator (JT)
- 2023 Jeep Gladiator (JT)
- 2022 Jeep Gladiator (JT)
- 2021 Jeep Gladiator (JT)
- 2020 Jeep Gladiator (JT)
Jeep Wrangler 2-Door (JL)
- 2024 Jeep Wrangler 2-Door (JL)
- 2023 Jeep Wrangler 2-Door (JL)
- 2022 Jeep Wrangler 2-Door (JL)
- 2021 Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
Synergy Manufacturing Front Lift Coil Springs Options
| Part Number | Catalog # | Lift Height | Price | ||||||
|---|---|---|---|---|---|---|---|---|---|
| 8863-10 | 16315-6350 | 2in for 2-Door/1in for 4-Door | $300.00 | ||||||
| 8863-20 | 16315-6351 | 3in for 2-Door/2in for 4-Door | $300.00 | ||||||
| 8863-30 | 16315-6352 | 4in for 2-Door/3in for 4-Door | $300.00 |
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Synergy Manufacturing Front Lift Coil Springs Reviews
I installed these myself with little difficulty. Believe the description on the heights. I put an aftermarket bumper on that pushed the front end down just shy of 1 inch. I did the math to get the height back up plus take out the factory rake. These springs already take into account for an aftermarket bumper. My ride height was higher than my "math". Not disappointed as I like the height. I know have a 1/2" coil spring spacer on order for the rear. Spring is slightly stronger than the original. I would highly recommend this spring. Modifying your Jeep is a slippery slope, but it is so fun and Quadratec has all the modification parts you could ever want.
