Skyjacker 2.5in. Component Box with Front Coil & Rear Spacer Lift for 20-25 Jeep Gladiator JT
Maintains Stock Handling: Developed to provide a superior ride and engineered to function fully with Jeep’s distinctive handling characteristics.
Dual-Rate Front Springs: Delivers a comfortable ride with the ability to flex for increased articulation.
Rear Coil Spring Spacers: Keeps the proper suspension geometry to ensure the Electronic Stability Control (ESC) system functions within factory parameters.
Note: Will Not Fit Jeep Mojave Model
Note: This kit has front springs (rears are not included). Rear coil spring spacers are included.
Many states have laws that limit the maximum height of a lifted vehicle. Never exceed the legal height limit.
The Skyjacker 2.5in. Component Box with Front Coil & Rear Spacer Lift for Jeep Gladiator JT was developed to provide a superior ride. Engineered to function fully with Jeep’s distinctive handling characteristics. The lift kit has everything you need to take your Jeep wherever your adventure takes you. Included in this kit are front dual-rate, long-travel coil springs, rear coil spring spacers, front bump stop spacers and sway bar end links. The 1st flex rate stage of the front spring delivers a comfortable ride with the ability to flex for increased articulation. The flex rate expands during full articulation as the suspension drops. This keeps the coil springs seated in the upper coil mount and the tires in contact with the terrain. The 2nd ride rate stage only engages after compression past the flex rate. The rear 1-Piece Coil Spring Spacers function perfectly with Gladiator's factory coil springs. This keeps the proper suspension geometry to ensure the Electronic Stability Control (ESC) system functions within factory parameters. Front and rear extended-length sway bar end links allow full articulation as the suspension drops.
- Features: Dual Rate Coil Springs
- Shocks Included: Without Shocks
- Max Tire Size: 33
- Lift Height Range: 2.5 Inch
- Included Parts: Bump Stops, Coil Spacer, Coil Springs, Sway Bar Endlinks or Coil Spacer, Coil Springs, Sway Bar Endlinks
Jeep Gladiator (JT)
- 2025 Jeep Gladiator (JT)
- 2024 Jeep Gladiator (JT)
- 2023 Jeep Gladiator (JT)
- 2022 Jeep Gladiator (JT)
- 2021 Jeep Gladiator (JT)
- 2020 Jeep Gladiator (JT)
Skyjacker 2.5in. Component Box with Front Coil & Rear Spacer Lift Options
| Part Number | Catalog # | Rubicon or Non-Rubicon | Engine Type | Price | |||||
|---|---|---|---|---|---|---|---|---|---|
| G250LT | 16117-2502 | Non-Rubicon | Gas Engine | $372.99 | |||||
| G250LTD | 16117-2504 | Non-Rubicon | EcoDiesel Engine | $372.99 | |||||
| G250RLT | 16117-2506 | Rubicon | Gas Engine | $372.99 | |||||
| G250RLTD | 16117-2508 | Rubicon | EcoDiesel Engine | $372.99 |
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Skyjacker 2.5in. Component Box with Front Coil & Rear Spacer Lift Reviews
DIY 2021 JT Rubicon Diesel install and over all was 6 hours total on garage floor with normal tools. 4 hours on front and 2 on back. Getting front springs installed is challenging. With all lines either disconnected or loosened you still need to loosen the top and bottom control arms and use spring compressors to get them in. The sway links ends are poor in design and will be replacing them. The rear spacers go on top of spring and with a bolt to hold them but its next to impossible to bolt these in so I did not. Overall it's a good price for the kit and I used Bilstien shocks with Metalcloaks front track bar and rear relocation bracket. Good budget lift
