Rugged Ridge 15100.24 Trekker Series Winch 12,500 lbs with Steel Line and Wired Remote
Reliable and Trail Proven: Designed, engineered, and field tested by Rugged Ridge engineers for reliability. A heavy duty 5.6 / 6.6 series-wound motor delivers consistent pull strength through a bulletproof 3-stage planetary drive gear. A 212:1 gear ratio means you see quicker line speeds.
Waterproof Construction: An IP-68 waterproof rating, ensures protection from all water, dirt and sand.
Trekker C10 Specifications: 10,000lbs pulling capacity with Steel Line and Wired Remote.
Trekker S10 Specifications: 10,000lbs pulling capacity with Synthetic Rope and Wireless Remote.
Trekker C12.5 Specifications: 12,500lbs pulling capacity with Steel Line and Wired Remote.
Trekker S12.5 Specifications: 12,500lbs pulling capacity with Synthetic Rope and Wireless Remote.
Steel Cable or Synthetic Rope: Trekker Series Winches are available with steel line for long lasting strength or synthetic line for safety. The Synthetic version will include a hawse fairlead and the Steel Line version will include a roller fairlead.
- Winch Assembly
- Fairlead (Roller or Hawse)
- Wired or Wireless Remote
- Hook Safety Strap
- Winch Rope (synthetic or steel Line)
- Winch Hook
- Installation Hardware
- Line Pull: 10,000 lbs or 12,500 lbs
Rugged Ridge Trekker Series Winch Options
| Part Number | Catalog # | Options | Price | ||||||
|---|---|---|---|---|---|---|---|---|---|
| 15100.07 | 92109-1050 | 10,000 lbs w/ Steel Cable and Wired Remote | $549.99 | ||||||
| 15100.08 | 92109-1051 | 10,000 lbs w/ Synthetic Rope and Wireless Remote | $699.99 | ||||||
| 15100.24 | 92109-1052 | 12,500 lbs w/ Steel Line and Wired Remote | $699.99 | ||||||
| 15100.25 | 92109-1053 | 12,500 lbs w/ Synthetic Rope and Wireless Remote | $849.99 |
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Rugged Ridge Trekker Series Winch Reviews
Solid winch.
The Rugged Ridge XHD front bumper looked incomplete without the winch so I sprung for the Trekker 10 winch. It was a bit tricky getting the 4 square winch mounting nuts to behave but with a bit of patience I finally succeeded. Once I tightened it all down I installed the control module and leveraged it all back on to the Jeep whilst balancing it on two milk crates. The look is excellent and the fit was perfect. This completes the XHD bumpers of my wife's 2013 JK 2 door. Since I had the bumper off anyway I swapped out the fog lights for KC HiLiTES LEDs and Woo Hoo it looks good.
The installation was easy, very nice product I recommend it. now I am looking forward to use it (even if I don't want to get stock)
Questions
