Rugged Ridge 1-1209 Front Track Bar Bushing Kit for 07-18 Jeep Wrangler JK
Quadratec Part #:
16049-4102
Rugged Ridge Part #:
1-1209
Description
There has been an ongoing debate about rubber vs. polyurethane as to what is better, It truly depends on how you are using your Jeep. In most cases polyurethane outperforms its rubber counterparts in replacement of bushings and mounts. The products will last longer standing up to road debris, chemicals, oils, compression, and load. They will perform better by removing additional sloppiness in suspension performance due to worn, damaged, or missing bushings. It is however, a little stiffer than rubber.
Details
- Features: Front, Metal, Polyurethane
- Color: Red
- Shipping Weight: 1lb
- Shipping Dimensions: 6in x 5in x 2in (L x W x H)
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Rugged Ridge Front Track Bar Bushing Kit Reviews
Brian W.
7/27/2017
Worked great until I upgraded trackbar, then I had to toss them. My bad, my lack of research.
Benjamin S.
6/3/2018
These bushings bought me some time but eventually I upgraded to an HD track bar. It should be fine for a stock JK.
Daniel V.
4/21/2020
It was a challenge getting the sleeves on the bushings. I used the grease that was supplied along with a table vice and some good ol’ fashioned elbow Grease. The first one took me 10 minutes and the second one took 2 hrs. The biggest challenge is getting the rim Of the bushing into the sleeve and then it’s easy. Would have been really nice if they came with them already on. It was a fun challenge and am now looking forward to install them.