Rough Country 1622TC Transfer Case Lowering Kit for 87-95 Jeep Wrangler YJ
Something to consider when lifting your Jeep is the angle of the rear driveshaft. Improper driveline geometry causes unnecessary wear and vibration. The Rough Country Transfer Case Lowering Kit is designed to optimize the rear driveshaft angle on a YJ Wrangler. This 100% bolt on kit features tube steel transfer case skid plate spacers and extended hardware.
Installation Note: This Transfer Case Lowering Kit is for Use with 4-6in of Lift
Vehicle Specific Design: The Rough Country Transfer Case Lowering Kit is engineered for use with YJ Wranglers with 4 to 6 inches of lift.
Driveline Geometry: By moving the rear transfer case output yoke, the Rough Country Transfer Case Lowering Kit improves rear driveshaft angles.
Bolt-On Application: For ease of install, the Rough Country Transfer Case Lowering Kit mounts to your Jeep without cutting, drilling, or other modification. The tubular spacers fit between the transfer case skid plate and the frame.
- Transfer Case Model: NP231
- Shipping Weight: 11lb
- Shipping Dimensions: 30in x 5in x 3in (L x W x H)
Jeep Wrangler (YJ)
- 1995 Jeep Wrangler (YJ)
- 1994 Jeep Wrangler (YJ)
- 1993 Jeep Wrangler (YJ)
- 1992 Jeep Wrangler (YJ)
- 1991 Jeep Wrangler (YJ)
- 1990 Jeep Wrangler (YJ)
- 1989 Jeep Wrangler (YJ)
- 1988 Jeep Wrangler (YJ)
- 1987 Jeep Wrangler (YJ)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Rough Country Transfer Case Lowering Kit Reviews
Looks way better than using washers like people do.
Used in conjunction with 8 degree leaf spring shims, extended leaf spring bolts to hold the shims in place, and Rubicon Express 4.5 inch lift springs. Dropping the transfer case and changing angle of pinion yolk was definitely a must when lifting that high so that you don't bind your drive shaft on a YJ project.
This really straightened out the rear drive shaft. I wish I would have gotten one about 1/2 as thick