Flare Compatibility: Rough Country Front & Rear Inner Fender Liners are designed to work with Rough Country Tubular Fender Flares and Fender Delete kits. They are also compatible with most aftermarket flares. Factory fender flares will need to be modified in order to fit with these inner fenders.
Vehicle Specific Design: The Rough Country Front & Rear Inner Fender Liners are engineered to fit all JK Wranglers. They are compatible with both two and four door models, regardless of trim package or factory options. If you have Rough Country Adjustable Vertex Shocks on your Jeep, then you will need Rough Country part number 10511V.
Contrast Color: The rear inner fender liners feature a cutout “Rough Country” logo that lines up with the body tub so that the factory paint shows through. The front fender liners include a backing panel for the “RC” cutout, that can be painted as an accent.
Corrosion Resistant: Rough Country finishes the steel of their inner fender liners in a durable black powder coat.
- Color: Black
- Shipping Weight: 44lb
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Rough Country Front & Rear Inner Fender Liners Reviews
Front inner liners installed very easily and zero noise while going over obstacles. The rear liners were an ordeal to install. Do not preassemble the three parts for each side! You will need to first drill out the 3 holes on each side with a 3/8 bit )not 1/2” as instructions state). The forward-most hole requires both bending about 15 degrees toward ground and you will need to buy 8 6m30 stainless bolts to reach the hole on either side. I had to use thes longer bolts to connect the left panel to the middle panel on either side as well. Even after I added the rubber liner to all three rear passenger panels, I have a bad rattle over minor obstacles. I’ll have to add more insulating material behind all three panels in hopes of a resolution after retightening all bolts.
poor paint job would not recommend