Rough Country RC614 1.25in Body Mount Lift Kit for 18-25 Jeep Wrangler JL with Automatic Transmission
NOT Compatible with Manual Transmissions
Fiberglass Reinforced Nylon: The bushings reduce both noise and vibration, but they are stronger and longer lasting than the factory components.
Heavy Duty Design: The Rough Country 1.25in Body Mount Lift Kit includes new Grade 8 hardware for strength and durability.
1.25in Lift: By increasing the height of the body bushings by 1-1/4in, the Rough Country 1.25in Body Mount Lift Kit provides additional ground clearance by adding a spacer to the factory body mount.
Rear Bumper Bracket: The included rear bumper brackets lift the rear bumper 1.25”, so there will not be a gap between the back of the tub and the frame. These brackets are for use with the OEM rear bumper only.
Level 2Intermediate- NOT Compatible Manual Transmissions
- Rear Bumper Brackets are for Factory Rear Bumper Only
- 1.25in Body Mount Lift Bushings
- Rear Bumper Brackets
- Installation Hardware
- Color: Black
- Material: Hard Plastic
- Lift: 1.25" Lift
- Shipping Weight: 9lb
- Shipping Dimensions: 18in x 7in x 4in (L x W x H)
Jeep Wrangler 2-Door (JL)
- 2025 Jeep Wrangler 2-Door (JL)
- 2024 Jeep Wrangler 2-Door (JL)
- 2023 Jeep Wrangler 2-Door (JL)
- 2022 Jeep Wrangler 2-Door (JL)
- 2021 Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2025 Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Rough Country 1.25in Body Mount Lift Kit Reviews
Good product, well packaged, every thing was correct in the box. the only negative is the direction are lacking. For example I had extra parts in my kit, I'm assuming they are for different models of Jeep. the direction have you remove parts that you really don't have to remove like the front filler panels and the front tires. The directions also say to remove discard the rear body filler panels in front of the rear bumper and I'm not sure why they say to discard them because after I installed the kit including the bumper relocation brackets, my filler panels still fit so I put them back on.
I'm not a mechanic but I'm semi-mechanically inclined and I found this install to be easy but it took much longer than expected due to going very slow removing the body mounts bolt so as to not break them. The most difficult bolts to remove were the second mount from the very front on each side.
All in all a good kit and I would recommend it. Just for reference I have a 2018 Jeep JL Wrangler Sport 2 door.