DS18 JP6 Plug and Play Dash Speakers Enclosure Pods with 6" Speakers for 18-24 Jeep Wrangler JL & Gladiator JT
- Nominal Diameter: 6.5"
- Nominal Impedance: 4 Ohms
- RMS Power Handling: 150 Watts
- MAX Power Handling: 300 Watts
- Sensitivity (1w/1m): 96 dB
- Frequency Response: 100Hz - 10KHz
- Recommended HI Pass Crossover: 120Hz
- Voice Coil Diameter: 1.5"
- Voice Coil Former Material: Kapton
- Winding Material: CCAW
- Cone Material: Paper
- Surround Material: Cloth
- Basket Material: Steel
- Magnet Material: Neodymium
- Magnet Weight: 3 Oz
- Equivilant Volume: Vas 4.463 Ltr
- Excursion (one way): Xmax 1.5 mm
- Free Air Resonance: Fs 138 Hz
- Mechanical Factor: Qms 4.249
- Electrical Factor: Qes 0.977
- Total Factor: Qts 0.794
- Mechanical Mass: Mms 7.166 gr
- Mechanical Compliance: Cms 148.927 u/M/N
- BL Factor: BL 4.767
- Voice Coil Inductance: Le 0.08696mH
- Cone Area: Sd 145 cm²
- DC Resistance: Re 3.2 Ohms
- Mechanical Mass w/o air: Mmd 6.159g
- Size: 6"
- Location: Dash
- Shipping Weight: 7lb
- Shipping Dimensions: 17in x 12in x 9in (L x W x H)
Jeep Gladiator (JT)
- 2024 Jeep Gladiator (JT)
- 2023 Jeep Gladiator (JT)
- 2022 Jeep Gladiator (JT)
- 2021 Jeep Gladiator (JT)
- 2020 Jeep Gladiator (JT)
Jeep Wrangler 2-Door (JL)
- 2024 Jeep Wrangler 2-Door (JL)
- 2023 Jeep Wrangler 2-Door (JL)
- 2022 Jeep Wrangler 2-Door (JL)
- 2021 Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
DS18 Plug and Play Dash Speakers Enclosure Pods with 6" Speakers Reviews
Took about two hours to install on my 2019 Rubicon. You'll have to remove a lot of the dashboard in order to remove the stock speaker enclosures. Not too difficult if you take your time and watch a few Youtube videos on the process.
I have the Alpine system, but the front speakers have always rattled with certain frequencies/heavy bass. (Apparently this is a common problem?) After several failed attempts to reinforce and cushion the stock speaker enclosures, I decided to pick up this DS18 kit. These are bigger than the stock Alpine speakers and sound great. Once you're able to pull out the stock speakers/enclosures these bolt right on and plug in to the stock connection. And no more rattling!