Crown Automotive 55020432 Windshield Frame for 87-95 Jeep Wrangler YJ
Quadratec Part #:
12501-0003
Crown Automotive Part #:
55020432
Description
The Crown Automotive Windshield Frame for the Wrangler YJ is a direct replacement for the factory frame. Made to the original Jeep design and fitment, this sturdy replacement fits original windshield glass. seals and hardware. Pre-punched holes for the wiper system and weld nuts in place inside for the upper hinges. Fresh steel at the top to tap into for both the soft top channel outside or the hardtop inside. Black primer coat has been applied at the factory to reduce prep time, but some minor work may still need to be done prior to painting and assembly. Great time to replace the cowl seal under the frame while its off.
Details
- Color: Paintable Primer
- Location: Windshield Frame
- Shipping Weight: 29lb
- Dimensions: 63in x 28in x 5in (L x W x H)
Jeep Wrangler (YJ)
- 1995 Jeep Wrangler (YJ)
- 1994 Jeep Wrangler (YJ)
- 1993 Jeep Wrangler (YJ)
- 1992 Jeep Wrangler (YJ)
- 1991 Jeep Wrangler (YJ)
- 1990 Jeep Wrangler (YJ)
- 1989 Jeep Wrangler (YJ)
- 1988 Jeep Wrangler (YJ)
- 1987 Jeep Wrangler (YJ)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Crown Automotive Windshield Frame Reviews
James G.
11/9/2021
A-1 quality !! Fast shipping
Luis H.
6/18/2021
Minor touchups before painting but works great perfect fit
Danny U.
9/10/2021
Over all, it's what I would expect for aftermarket. The frame came with a couple of small dings, one corner bent and primer flaking off, a spot weld on the rib at the lower front, one of the nut plates for the hinge bolts is floating free (might actually help with alignment) and some small weld splatters that will have to be ground off. After stripping and a little filler, it should be good to paint and install.
